Peristaltic hoses for conveying chemical fluids are specifically designed for this type of pump. Unlike other pumps, in peristaltic pumps the hose not only transports the fluid, but is also the active pumping element....
EPDM HOSE FOR SUCTION AND ASPIRATION
The EPDM suction hose , also compatible with Tech Chemical, Tigerflex TY, or S-660, is designed for transferring, suctioning, and discharging liquids and chemicals under demanding conditions. It is made of EPDM rubber , reinforced with an outer polyethylene spiral and textile reinforcement.
It is suitable for use with agricultural liquid fertilizers, irrigation lines, liquid manure transport, vessel bilge discharge, pumps, water, drains, garbage collection, septic water and wastewater, wastewater disposal in fracking processes and general water suction.
Main features:
- Interior: Smooth EPDM surface
- Exterior: Corrugated, polyethylene spiral
- Reinforcement: Polyester mesh
- Temperature: -40ºC to +60ºC
It is supplied in a 40-meter roll for Ø51 and a 20-meter roll for Ø90.
The price reflects the cost of a full roll; it is not supplied cut to size.
€591.84
(tax incl.)
€489.12
(tax excl.)
Reference:
0900501
EPDM hose for suction and vacuuming
The EPDM suction and vacuum hose is designed for conveying, suctioning and discharging sewage, salt water, chemicals, acids, slurry and fertilizers , as well as for applications in construction, mining, plumbing and tanker trucks.
Made with high-quality EPDM rubber and reinforced with a rigid PVC spiral , it offers an excellent combination of strength, flexibility, and durability in industrial and agricultural environments.
Technical data sheet for EPDM hose for suction and vacuuming:
| Code | Inner diameter (mm) | Outer diameter (mm) | Weight (g/m) | Minimum radius of curvature (mm) | Working pressure (bar) | Length (m) |
| 0900501 | 51 | 63.4 | 1189 | 130 | 8 | 40 |
| 0900502 | 90 | 103.4 | 2520 | 300 | 5 | 20 |
Technical advantages
- High chemical resistance to aggressive products.
- Flexible and lightweight, easy to handle and roll up.
- Durable, even under sun exposure, ozone or saline environments.
- Excellent performance under vacuum and negative pressure.
- It does not collapse during suction thanks to its reinforced spiral.
- Minimal maintenance and long service life.
- Visible and safe, thanks to its distinctive yellow warning spiral.
Typical applications
- Black and wastewater.
- Salt and brackish waters.
- Chemicals and diluted acids.
- Industrial and construction applications.
- Mining and suction of sludge or slurry.
- Liquid fertilizers and nutrients.
- Water and sanitation systems and tanker trucks.
7 other products in the same category:
€1.21
(tax excl.)
€1.46
(tax incl.)
A reinforced W2 clamp is a fastener designed for high-pressure and heavy-duty applications. Thanks to its screw, it ensures a firm grip, vibration resistance, and durability. Applications: Industrial applications,...
€0.38
(tax excl.)
€0.46
(tax incl.)
The W2 endless clamp is ideal for automotive and industrial applications. It is used to secure and seal hoses and pipes.
Applications: Cooling and heating systems, Fuel and air systems in automobiles, Industrial and...
€8.28
(tax excl.)
€10.02
(tax incl.)
The Q20 chemical hose is a flexible and durable hose, designed to carry a wide range of aggressive chemicals. It can be used for chemical transfer, container filling and emptying, equipment cleaning, and irrigation....
€25.02
(tax excl.)
€30.28
(tax incl.)
The chemical suction and vacuum hose is specially designed to transport hazardous chemicals and prevent leaks. They are used in chemical plants, refineries, wastewater treatment plants, environmental cleaning,...
€175.00
(tax excl.)
€211.75
(tax incl.)
The double welding hose (50m) consists of two joined hoses, one for oxygen and the other for a fuel gas (usually acetylene or propane). This configuration facilitates handling and reduces the risk of tangling....
€12.36
(tax excl.)
€14.95
(tax incl.)
The W2 double bridge clamp is a fastening element designed to securely hold hoses, pipes and conduits in industrial installations.
Applications: Air conditioning, ventilation and extraction systems.
Main features:
430...
Recently Viewed
€591.84
(tax incl.)
€489.12
(tax excl.)
The EPDM suction hose , also compatible with Tech Chemical, Tigerflex TY, or S-660, is designed for transferring, suctioning, and discharging liquids and chemicals under demanding conditions. It is made of EPDM rubber...
€47.00
(tax excl.)
€56.87
(tax incl.)
An ABT NG-6 4/3 center-mounted solenoid valve precisely controls the flow of pressurized oil. It has four ports and three positions. In the center position, ports A, B, and T are connected, enabling specific...
€5.39
(tax excl.)
€6.52
(tax incl.)
A DIN-6432 oscillating rear attachment is an accessory for pneumatic cylinders that comply with DIN ISO 6432. It allows the cylinder to oscillate in a given plane around a fixing point at its rear, while pushing or...
€32.78
(tax excl.)
€39.66
(tax incl.)
You tube male thread central stainless steel This type of T-shaped connection allows three pipes to be joined at a central point and a main pipe to branch in two directions. Applications: food industry, chemical...
€5.95
(tax excl.)
€7.20
(tax incl.)
The locking spring-loaded trigger head is used to control the release of energy stored in a spring. The trigger head acts as a holding and releasing mechanism. By activating the trigger head with a mechanical,...
€0.75
(tax excl.)
€0.91
(tax incl.)
The crimping ferrule for 2-braid hoses is a component for the manufacture and repair of hydraulic hoses. Designed for crimping, it ensures a secure connection between the double-braided metal hydraulic hose and the...
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
