Click for more products.
No produts were found.
Click for more products.
No produts were found.

PNEUMATIC DISTRIBUTORS

€62.92 (tax incl.)
€52.00 (tax excl.)
1/8 electropneumatic distributor to achieve movements in the pneumatic cylinders. Materials: Pilot in brass and stainless steel Aluminum slide, stainless steel spring, Brass bushings and NBR joints. Ø Step: 5 mm Flow...
€103.82 (tax incl.)
€85.80 (tax excl.)
ISO-1 distributor ISO 5599/1 connection Flow rate 1300 l/min. at 6 bar. Working pressure 2-10 bar. Temperature -5ºC / 50ºC Aluminum body and slider.  
€62.46 (tax incl.)
€51.62 (tax excl.)
Nominal diameter 5mm Nominal flow at 6 bar 550 Nl/min Max operating temperature 60°C Max pressure 10 bar Control pressure 2.5 ... 10 bar Response time TRA (14): 6 ms TRR (12): 15 ms Fluid: filtered air with or without...
€35.57 (tax incl.)
€29.40 (tax excl.)
1/8 valve with manual operation by 90º lever, in 3/2, 5/2 mono or bistable version, and 5/3 closed, open or pressure centers. Made entirely of technopolymer, with a reduced size, (22 mm wide) Provides a flow rate of...
€69.21 (tax incl.)
€57.20 (tax excl.)
Metal 90º lever distributor valve. Great performance. Available in 1/4" thread Maximum service pressure 8 bar. Admissible temperatures -5ºC / 60ºC Panelable. Lever actuation force: 3/2 ways 10N 5/2 tracks 15N 5/3 ways...
€154.40 (tax incl.)
€127.60 (tax excl.)
Manual valve with 90º lever operation. 1/2" thread Pressure 8 bar. Temperature -5º / 60ºC. Actuation force 15 N. Flow rate 2620 Nl/min.
€154.28 (tax incl.)
€127.50 (tax excl.)
ISO-1 distributor ISO 5599/1 connection Flow rate 1300 l/min. at 6 bar. Working pressure 2-10 bar. Temperature -5ºC / 50ºC Supplied with the electropilot. Coil and connector not included.
€120.27 (tax incl.)
€99.40 (tax excl.)
Materials: Pilot in brass and stainless steel, operator, base and piston in POM. Aluminum alloy body, aluminum slide, stainless steel spring, brass bushings and NBR gaskets. Ø Step: 8 mm Flow rate: 2700 l/min (6 bar)...
€45.38 (tax incl.)
€37.50 (tax excl.)
Nominal diameter 5mm Nominal flow at 6 bar 550 Nl/min Max operating temperature 60°C Max pressure 10 bar Control pressure 2.5 ... 10 bar Response time TRA (14): 6 ms TRR (12): 15 ms Fluid: filtered air with or without...
€65.80 (tax incl.)
€54.38 (tax excl.)
1/4 electropneumatic distributor to achieve movements in the pneumatic cylinders. Materials: Pilot in brass and stainless steel Aluminum slide, stainless steel spring, Brass bushings and NBR joints. Ø Step: 8 mm Flow...
€151.61 (tax incl.)
€125.30 (tax excl.)
1/2" electropneumatic distributor to generate movements to pneumatic cylinders. Aluminum alloy body, aluminum slider, Stainless steel spring, brass bushings and NBR gaskets. Ø Step: 8 mm Flow rate: 3150 nl/min (6 bar)...
€105.56 (tax incl.)
€87.24 (tax excl.)
A NAMUR connection electrical distributor is an electromechanical device used to connect and disconnect a pneumatic actuator to an electrical power source. NAMUR connection electrical distributors are used in a wide...
Showing 1-12 of 12 item(s)

Pneumatic distributors. Buy tire distributors online.

Pneumatic distributors are mechanical devices that direct and regulate the movement of compressed air; They govern the exit and entry, closing or enabling, direction and flow of compressed air, in all its devices or peripherals. They are usually pneumatic cylinders

Types of pneumatic distributors

The types of pneumatic distributors could be selected from:

  • Position or direction control distributor (distributors) These valves control the direction and diversion of air to the associated elements. Start and stop.
  • Distributor or flow valve. Also called flow control valve. Their mission is to regulate the speed of the pneumatic cylinder, regulating the flow of compressed air.
  • Distributor or pressure control valve. Its main function is to protect other elements of the electrical circuit from overpressures. Therefore, if they detect a high pressure in the circuit, reaching the maximum level, it will cut off the air flow. In this way, by cutting and opening the air flow, it is possible to constantly stabilize the pressure of the pneumatic circuit.

How pneumatic and parts distributors work

A distributor valve consists of two parts, completely differentiated. One would be the body, the so-called distributor, and the pilot or drive. The body consists of a casing or box, normally made of aluminum that houses a slider or clapet inside, which are responsible for distributing the compressed air from one path to another.

The piloting is the way we change the inner slide. There are several types:

  • Pneumatic, through a compressed air signal, makes the slider or internal clapper move
  • Electric. A coil with alternating or direct current causes a magnetic field and moves the internal slider or clapper.
  • Manual, The movement of the slide or clapet is carried out manually
  • Mechanics. Made by mechanical elements, such as pulleys, antennas, limit switches, stops, pivots, etc.

They are simple elements and easy to assemble. It requires little maintenance and is economical to install. Long durability, changing the gasket kit.

To identify each valve or distributor and the type of actuation, a universal symbology has been applied that determines it.

Pneumatic distributors are safe, do not have explosive characteristics or produce excessive heat. The compressed air used to move the pneumatic cylinders does not generate water hammer, which reduces breakdowns or damage to the equipment. They are used in practically all types of industries, where automation is present.

Read more

Menu