Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
ISO-6432 CYLINDER SENSOR SUPPORT
ISO-6432 CYLINDER SENSOR SUPPORT
ISO-6432 CYLINDER SENSOR SUPPORT
ISO-6432 CYLINDER SENSOR SUPPORT

ISO-6432 CYLINDER SENSOR SUPPORT

Sensor support for ISO-6432 cylinders

The bracket is essential in pneumatic systems using ISO-6432 cylinders. Its main function is to securely and accurately fix a sensor to a pneumatic cylinder.

Ensures an exact position of the sensor in relation to the plunger, avoiding erroneous readings.

Protects the sensor from possible mechanical damage and vibrations.

Applications: Automation, Packaging, Textile, Food and Beverage.

Technical data sheet:

  • Made of plastic. Lightweight and chemical resistant, suitable for specific applications.
€5.80 (tax included)
€4.79 (tax excl.)
DIAMETERS
  • Ø 10
  • Ø 12
  • Ø 16
  • Ø 20
  • Ø 25
Reference:
52110004
Description

Sensor support for ISO-6432 cylinders

SOPORTE SENSOR ISO-6432

Product Details
52110004
Comments
8 other products in the same category:
SENSOR SUPPORT ROD CYLINDER Ø32-Ø63

€6.40 (tax excl.)
€7.74 (tax included)
Rod cylinder sensor support Ø32-Ø63 It is used to securely attach a sensor to an ISO 6432 pneumatic cylinder with a rod diameter ranging from 32 to 63 mm. Ensures that the sensor remains in the correct position,...
PNP SENSOR CABLE 2mt AND 3 WIRES

€32.13 (tax excl.)
€38.87 (tax included)
A 2-meter, 3-wire PNP sensor detects the presence or absence of an object without physical contact. It emits an electrical signal when an object is within its detection range. Applications: Part detection in...
REED SENSOR M-8 CONNECTOR

€20.59 (tax excl.)
€24.92 (tax included)
An M-8 connector reed sensor is a magnetic switch that detects the presence of a magnetic field, and whose characteristic is that its electrical connection is not through loose cables, but through an M8 connector....
REED SENSOR CABLE 2mt

€15.29 (tax excl.)
€18.50 (tax included)
The 2m reed switch is a type of magnetic switch used to detect the presence or absence of a magnetic field. It is a passive device that does not require a power supply to function as a sensor and is activated by...
REED SENSOR CABLE 5 Mt

€18.79 (tax excl.)
€22.74 (tax included)
REED sensor cable 5 mt Technical sheet: Electrical input: Direct output 2 wires. Normally open. Voltage 5-240V DC/AC Charging current: 5 to 50 mA. Max. 100 mA Response time 0.1 ms Operating temperature -10ºC - 70ºC...
KOGANEI CS3B SENSOR

€36.40 (tax excl.)
€44.04 (tax included)
The Koganei CS3B sensor is a magnetic sensor primarily used to detect the position of Koganei pneumatic cylinders. It is essential in industrial automation systems because it allows for accurately determining when a...
M-8 CABLE EXTENSION

€8.74 (tax excl.)
€10.57 (tax included)
The M-8 cable extension is useful in industrial environments that use sensors and actuators with M-8 connectors. It allows the cable to be extended, allowing devices to be located at a greater distance from the power...
PNP SENSOR M-8 CONNECTOR

€24.96 (tax excl.)
€30.20 (tax included)
The PNP sensor with an M-8 connector is used to detect the presence of a metallic object or the position of a mechanical element and transmit this information to a control system. PNP refers to the sensor output:...
Recently Viewed
ISO-6432 CYLINDER SENSOR SUPPORT

€5.80 (tax included)
€4.79 (tax excl.)
Sensor support for ISO-6432 cylinders The bracket is essential in pneumatic systems using ISO-6432 cylinders. Its main function is to securely and accurately fix a sensor to a pneumatic cylinder. Ensures an exact...
STUB END SCH-40 A-316L

€14.20 (tax excl.)
€17.18 (tax included)
A SCH-40 A-316L stub end is a short, unthreaded pipe end designed to be welded to a pipe. It is used in the manufacture of industrial piping systems, especially when using lap joint flanges. Applications: Chemical and...
1/4" FEMALE INFLATION NOZZLE

€6.60 (tax excl.)
€7.99 (tax included)
A 1/4" female inflation nipple is commonly used on inflation systems, such as air compressors. Its function is to connect a hose or inflation tool to a compressed air source. Applications: mechanical workshops,...
PRESSURE CYLINDER STOP

€4.28 (tax excl.)
€5.18 (tax included)
The cylinder stop is used to stop or limit the linear movement of a hydraulic or pneumatic cylinder. Its function is to ensure that the cylinder does not extend beyond a predefined limit, thus controlling the final...
NG-10 MODULAR LIMITING VALVE

€168.75 (tax excl.)
€204.19 (tax included)
A NG-10 modular relief valve is a hydraulic component designed to protect a circuit or section of a hydraulic system from excessive pressure by diverting unnecessary oil flow when the pressure exceeds a preset maximum...
DIN-43650-A RECTIFIER CONNECTOR

€12.00 (tax excl.)
€14.52 (tax included)
DIN-43650-A rectifier connector A DIN-43650-A rectifier connector is an electrical device used for connecting solenoid valve coils and other industrial actuators, which integrates a rectifier to convert alternating...

Menu

Please sign in first.

Sign in