Click for more products.
No produts were found.
Click for more products.
No produts were found.

PNP SENSOR CABLE 2mt AND 3 WIRES

A 2-meter, 3-wire PNP sensor detects the presence or absence of an object without physical contact. It emits an electrical signal when an object is within its detection range.

Applications: Part detection in production lines, Robotics, Limit switches, Sorting systems.

Technical sheet:

  • For T-profile slot
  • Magnetic-resistive
  • PNP - NPN connection (3)
  • Supply voltage: 100VAC/48V DC (4 to 8V DC).
  • Charging current: 5 to 50mA.
  • Consumption 4 mA.
  • Response time 0.1 ms
  • Operating temperature -25ºC / 70ºC
  • IP-67/IP-69 protection
  • 2 m PUR cable resistant to cutting oils
  • Signal by yellow LED diode.
€38.87 (tax included)
€32.13 (tax excl.)
Reference:
5202
Description

PNP sensor cable 2mt and 3 wires

SENSOR PNP 2mt. CABLE 3 hilos

Product Details
5202
Comments
8 other products in the same category:
€4.79 (tax excl.)
€5.80 (tax included)
Sensor support for ISO-6432 cylinders The bracket is essential in pneumatic systems using ISO-6432 cylinders. Its main function is to securely and accurately fix a sensor to a pneumatic cylinder. Ensures an exact...
€24.96 (tax excl.)
€30.20 (tax included)
The PNP sensor with an M-8 connector is used to detect the presence of a metallic object or the position of a mechanical element and transmit this information to a control system. PNP refers to the sensor output:...
€36.40 (tax excl.)
€44.04 (tax included)
The Koganei CS3B sensor is a magnetic sensor primarily used to detect the position of Koganei pneumatic cylinders. It is essential in industrial automation systems because it allows for accurately determining when a...
€6.40 (tax excl.)
€7.74 (tax included)
Rod cylinder sensor support Ø32-Ø63 It is used to securely attach a sensor to an ISO 6432 pneumatic cylinder with a rod diameter ranging from 32 to 63 mm. Ensures that the sensor remains in the correct position,...
€15.29 (tax excl.)
€18.50 (tax included)
The 2m reed switch is a type of magnetic switch used to detect the presence or absence of a magnetic field. It is a passive device that does not require a power supply to function as a sensor and is activated by...
€8.74 (tax excl.)
€10.57 (tax included)
The M-8 cable extension is useful in industrial environments that use sensors and actuators with M-8 connectors. It allows the cable to be extended, allowing devices to be located at a greater distance from the power...
€20.59 (tax excl.)
€24.92 (tax included)
An M-8 connector reed sensor is a magnetic switch that detects the presence of a magnetic field, and whose characteristic is that its electrical connection is not through loose cables, but through an M8 connector....
€18.79 (tax excl.)
€22.74 (tax included)
REED sensor cable 5 mt Technical sheet: Electrical input: Direct output 2 wires. Normally open. Voltage 5-240V DC/AC Charging current: 5 to 50 mA. Max. 100 mA Response time 0.1 ms Operating temperature -10ºC - 70ºC...
Recently Viewed
€38.87 (tax included)
€32.13 (tax excl.)
A 2-meter, 3-wire PNP sensor detects the presence or absence of an object without physical contact. It emits an electrical signal when an object is within its detection range. Applications: Part detection in...
€200.00 (tax excl.)
€242.00 (tax included)
Single-phase 12V electric actuator used to generate load movement or any action that requires force.  90º rotation design (optionally 180º - 270º) Incorporates thermal temperature control. Electrical torque control....
€39.00 (tax excl.)
€47.19 (tax included)
A flexible hose is a type of hose that incorporates a mechanism that allows the fluid flow to be directed in different directions. It allows the fluid output to be directed at a 360º angle. Both ends have threaded or...
€700.35 (tax excl.)
€847.42 (tax included)
The PJ combination hammer blaster is effective with powders that tend to compact under pressure, as well as very fine, dry powders. This hammer blaster is the most effective solution against the formation of bridges...
€18.11 (tax excl.)
€21.91 (tax included)
Perforated strap hook It is expressly designed to hold and secure straps with regular perforations. These hooks are essential in a wide variety of industrial, logistics and organizational applications, where quick and...
€9.25 (tax excl.)
€11.19 (tax included)
The DIN TS-14 steel rail is a mounting component used in industrial installations for fixing and organizing pipes, hoses and cables. Common applications: Hydraulic and pneumatic systems, industrial installations, and...

Menu