Click for more products.
No products were found.

STRAIGHT SPLICING NEBULIZATION

Straight misting connection.

The straight joint is used in misting systems to connect two tubes or pipes in a straight line and keep the water flow in a linear direction.

This straight fitting allows a pipe line to be extended when necessary.

Common uses: Agriculture, Livestock, Industry, Domestic.

Technical data sheet:

  • Made of nickel-plated brass UNI EN 12164.
  • NBR Board.
  • Pressure 0-80 bar.
  • Temperature -20 / 60ºC
  • Available in 1/4" and 3/8" threads
  • Available in Ø1/4 and Ø3/8 tube
  • Recommended pipe: High resistance polyamide (1783)
Read moreShow less
€2.63 (tax incl.)
€2.17 (tax excl.)
DIAMETERS
  • Ø 1/4
  • Ø 3/8 Ø 1/4
  • Ø 3/8
Reference:
17820082
Description

Straight misting connection.

Read moreShow less
Product Details
17820082
Comments (0)
8 other products in the same category:
€9.00 (tax excl.)
€10.89 (tax incl.)
Nebulizer nozzle It is designed to convert a flow of liquid into a fine mist or aerosol. This transformation is achieved by forcing the liquid through a very small orifice or a series of orifices, causing it to...
€11.00 (tax excl.)
€13.31 (tax incl.)
A misting ball valve is used in misting systems to precisely control the flow of water to the misting nozzles. Typical applications: Agriculture, Livestock, Industry, Domestic. Technical sheet: Made of nickel-plated...
€1.27 (tax excl.)
€1.54 (tax incl.)
NEBULIZATION TUBE PLUG Its function is to seal the end of a pipe when water flow is not needed in that section. This is useful when: Maintenance work is carried out and sections need to be isolated. It is necessary to...
€5.50 (tax excl.)
€6.66 (tax incl.)
A misting tube expansion fitting is a fundamental component in misting irrigation systems. Its function is to connect smaller diameter tubes to larger diameter tubes, allowing the water flow to be increased in a...
€5.50 (tax excl.)
€6.66 (tax incl.)
The reducing fitting for misting tubing is essential for misting irrigation systems. It serves to join two tubing diameters, allowing the water flow to be adjusted and adapted to the specific needs of each irrigation...
€60.00 (tax excl.)
€72.60 (tax incl.)
The 50 m polyamide misting tubing is used to convey high-pressure water to create a fine mist or spray. The tubing can be bent without damaging it. It is resistant to water and most chemicals used in misting systems....
€1.60 (tax excl.)
€1.94 (tax incl.)
Plug with outlet for nebulizer. It is used in misting systems to temporarily close a pipe line while providing a connection point for a mist blower. It acts as a valve that allows the flow of water to be opened and...
€1.43 (tax excl.)
€1.73 (tax incl.)
Straight union tube thread misting. It is used in misting systems. It is used to safely and efficiently connect two tubes or a pipe to a misting nozzle. This union guarantees a watertight connection to prevent water...
Recently Viewed
€2.63 (tax incl.)
€2.17 (tax excl.)
Straight misting connection. The straight joint is used in misting systems to connect two tubes or pipes in a straight line and keep the water flow in a linear direction. This straight fitting allows a pipe line to be...
€19.40 (tax excl.)
€23.47 (tax incl.)
A micro valve is a small pneumatic component for precise control of compressed air flow. It is characterized by its manual operation using a button or lever. Applications: Industrial automation, Medical equipment,...
€27.00 (tax excl.)
€32.67 (tax incl.)
An ATEX blow-off solenoid valve coil . It is used to operate a blow-off solenoid valve in industrial cleaning systems, mainly in dust collectors with bag or cartridge filters in places or environments with a risk of...

Menu

Settings