Click for more products.
No products were found.

NEBULIZATION TUBE PLUG

NEBULIZATION TUBE PLUG

Its function is to seal the end of a pipe when water flow is not needed in that section. This is useful when:

  1. Maintenance work is carried out and sections need to be isolated.
  2. It is necessary to regulate the amount of water that reaches different misting zones.
  3. A pipe is cut to a specific length and leaks must be prevented.

Applications: Agriculture, Livestock, Industry, Domestic.

Technical data sheet:

  • Made of nickel-plated brass UNI EN 12164.
  • NBR Board.
  • Pressure 0-80 bar.
  • Temperature -20 / 60ºC
  • Available in 1/4" and 3/8" threads
  • Available in Ø1/4 and Ø3/8 tube
  • Recommended pipe: High resistance polyamide (1783)
Read moreShow less
€1.54 (tax incl.)
€1.27 (tax excl.)
DIAMETERS
  • Ø 1/4
  • Ø 3/8
Reference:
17790082
Description

NEBULIZATION TUBE PLUG

Read moreShow less
Product Details
17790082
Comments (0)
8 other products in the same category:
€9.00 (tax excl.)
€10.89 (tax incl.)
Nebulizer nozzle It is designed to convert a flow of liquid into a fine mist or aerosol. This transformation is achieved by forcing the liquid through a very small orifice or a series of orifices, causing it to...
€1.43 (tax excl.)
€1.73 (tax incl.)
Straight union tube thread misting. It is used in misting systems. It is used to safely and efficiently connect two tubes or a pipe to a misting nozzle. This union guarantees a watertight connection to prevent water...
€60.00 (tax excl.)
€72.60 (tax incl.)
The 50 m polyamide misting tubing is used to convey high-pressure water to create a fine mist or spray. The tubing can be bent without damaging it. It is resistant to water and most chemicals used in misting systems....
€2.17 (tax excl.)
€2.63 (tax incl.)
Straight misting connection. The straight joint is used in misting systems to connect two tubes or pipes in a straight line and keep the water flow in a linear direction. This straight fitting allows a pipe line to be...
€5.50 (tax excl.)
€6.66 (tax incl.)
A misting tube expansion fitting is a fundamental component in misting irrigation systems. Its function is to connect smaller diameter tubes to larger diameter tubes, allowing the water flow to be increased in a...
€2.05 (tax excl.)
€2.48 (tax incl.)
Straight connection with nebulizer outlet. It is used in misting systems to connect a pipe to a misting nozzle directly, easily and safely. Ensures a watertight connection to prevent water leaks. Typical applications:...
€2.67 (tax excl.)
€3.23 (tax incl.)
Nebulization connection. It is used in misting systems to divide the water flow into two directions, which can feed one or more misting nozzles. Applications: Agriculture, Livestock, Industry, Domestic. Technical data...
€5.50 (tax excl.)
€6.66 (tax incl.)
The reducing fitting for misting tubing is essential for misting irrigation systems. It serves to join two tubing diameters, allowing the water flow to be adjusted and adapted to the specific needs of each irrigation...
Recently Viewed
€1.54 (tax incl.)
€1.27 (tax excl.)
NEBULIZATION TUBE PLUG Its function is to seal the end of a pipe when water flow is not needed in that section. This is useful when: Maintenance work is carried out and sections need to be isolated. It is necessary to...
€3.40 (tax excl.)
€4.11 (tax incl.)
Identification ring It is used to be placed on an electrical socket or connector and to identify it visually. Its function is to organize and label sockets in complex electrical systems, such as control panels,...
€5.30 (tax excl.)
€6.41 (tax incl.)
The linear joint is an accessory designed to join and align aluminum profiles in longitudinal extensions, allowing the structural and aesthetic continuity of the assembly to be maintained. Applications: modular...
€2.06 (tax excl.)
€2.49 (tax incl.)
Misting elbow joint. A misting elbow allows you to change the direction of water flow within a misting system. The elbow creates a 90º angle in the pipe, and changes the direction of the water flow in a different...
€25.00 (tax excl.)
€30.25 (tax incl.)
A 3-position locking long cam selector allows you to select between three different positions using a long cam that locks in each position. To select a position, move the long cam until the locking mechanism secures...
€0.92 (tax excl.)
€1.11 (tax incl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...

Menu

Settings