Click for more products.
No produts were found.
Click for more products.
No produts were found.

STRAIGHT UNION TUBE THREAD NEBULIZATION

Straight union tube thread misting.

It is used in misting systems. It is used to safely and efficiently connect two tubes or a pipe to a misting nozzle.

This union guarantees a watertight connection to prevent water or compressed air leaks.

Variety of uses: Agriculture, Livestock, Industry, Domestic.

Technical data sheet:

  • Made of nickel-plated brass UNI EN 12164.
  • NBR Board.
  • Pressure 0-80 bar.
  • Temperature -20 / 60ºC
  • Available in 1/4" and 3/8" threads
  • Available in Ø1/4 and Ø3/8 tube
  • Recommended pipe: High resistance polyamide (1783)
€1.73 (tax included)
€1.43 (tax excl.)
Tube diameter - Thread
  • Ø 1/4-1/4"
  • Ø 3/8-3/8"
  • Ø 3/8-1/4"
Reference:
17760073
Description

Straight union tube thread misting.

Product Details
17760073
Comments
12 other products in the same category:
€2.67 (tax excl.)
€3.23 (tax included)
Nebulization connection. It is used in misting systems to divide the water flow into two directions, which can feed one or more misting nozzles. Applications: Agriculture, Livestock, Industry, Domestic. Technical data...
€2.05 (tax excl.)
€2.48 (tax included)
Straight connection with nebulizer outlet. It is used in misting systems to connect a pipe to a misting nozzle directly, easily and safely. Ensures a watertight connection to prevent water leaks. Typical applications:...
€9.00 (tax excl.)
€10.89 (tax included)
Nebulizer nozzle It is designed to convert a flow of liquid into a fine mist or aerosol. This transformation is achieved by forcing the liquid through a very small orifice or a series of orifices, causing it to...
€2.06 (tax excl.)
€2.49 (tax included)
Misting elbow joint. A misting elbow allows you to change the direction of water flow within a misting system. The elbow creates a 90º angle in the pipe, and changes the direction of the water flow in a different...
€2.17 (tax excl.)
€2.63 (tax included)
Straight misting connection. The straight joint is used in misting systems to connect two tubes or pipes in a straight line and keep the water flow in a linear direction. This straight fitting allows a pipe line to be...
€5.50 (tax excl.)
€6.66 (tax included)
The reducing fitting for misting tubing is essential for misting irrigation systems. It serves to join two tubing diameters, allowing the water flow to be adjusted and adapted to the specific needs of each irrigation...
€84.10 (tax excl.)
€101.76 (tax included)
A 2/2 high-pressure AL08 solenoid valve is used in industrial systems to precisely and automatically control the flow of fluids (liquids or gases). It is designed to operate in systems requiring high pressures, such...
€60.00 (tax excl.)
€72.60 (tax included)
The 50 m polyamide misting tubing is used to convey high-pressure water to create a fine mist or spray. The tubing can be bent without damaging it. It is resistant to water and most chemicals used in misting systems....
€11.00 (tax excl.)
€13.31 (tax included)
A misting ball valve is used in misting systems to precisely control the flow of water to the misting nozzles. Typical applications: Agriculture, Livestock, Industry, Domestic. Technical sheet: Made of nickel-plated...
€1.27 (tax excl.)
€1.54 (tax included)
NEBULIZATION TUBE PLUG Its function is to seal the end of a pipe when water flow is not needed in that section. This is useful when: Maintenance work is carried out and sections need to be isolated. It is necessary to...
€5.50 (tax excl.)
€6.66 (tax included)
A misting tube expansion fitting is a fundamental component in misting irrigation systems. Its function is to connect smaller diameter tubes to larger diameter tubes, allowing for an increased water flow in a specific...
€1.60 (tax excl.)
€1.94 (tax included)
Plug with outlet for nebulizer. It is used in misting systems to temporarily close a pipe line while providing a connection point for a mist blower. It acts as a valve that allows the flow of water to be opened and...
Recently Viewed
€1.73 (tax included)
€1.43 (tax excl.)
Straight union tube thread misting. It is used in misting systems. It is used to safely and efficiently connect two tubes or a pipe to a misting nozzle. This union guarantees a watertight connection to prevent water...
€8.00 (tax excl.)
€9.68 (tax included)
A polyamide Y fitting is a pipe or hose connector that allows three sections of pipe or hose to be joined together, creating a branch or a union where two flows combine into one, or one flow divides into two....
€36.00 (tax excl.)
€43.56 (tax included)
A 1/8" switching pressure switch with a T-15 connector is an electromechanical device used to detect changes in the pressure of a fluid (air or liquid) and activate or deactivate an electrical circuit in response to...
€35.00 (tax excl.)
€42.35 (tax included)
A mechanical counter is used to record the number of times a repetitive event or action occurs, such as a tap, a keystroke, a machine cycle, or the passage of an object. The counting information is displayed through...
€463.00 (tax excl.)
€560.23 (tax included)
LUBRICUS LUB-V Automatic Grease Gun 70 bar 24 VDC Electromechanical system. External 24VDC power supply. M-12x1 connector. Fat transport to NLGI-KI-2 400 cm³ lubricant cartridge Pressure 70 bar. Quick-Check, for...

Menu