Click for more products.
No products were found.

JRP PILOT-OPERATED PRESSURE REGULATOR

A JRP pilot-operated pressure regulator is a type of high-precision, high-flow pressure control valve designed to maintain a constant output pressure in a fluid system. It is used when large regulators are installed in hard-to-reach locations.

Applications: Steam systems, Industrial compressed air systems, Power generation, Chemical and petrochemical industry, Food and beverage industry

Technical sheet:

  • The regulators are free from the spring and the adjustment control knob.
  • The adjustment is achieved by means of pressure sent by a remotely controlled regulator.
  • In addition to the smooth and easy adjustment of the main circuit pressure, there is the possibility, with pilot precision regulators, of obtaining better sensitivity than the manual version.
Read moreShow less
€120.27 (tax incl.)
€99.40 (tax excl.)
SELECT THE THREAD
  • 3/8"
  • 1/2"
  • 3/4"
  • 1"
  • 1-1/2"
  • 2"
Reference:
34120013
Description

JRP pilot-operated pressure regulator

Read moreShow less
Product Details
34120013
Comments (0)
You may also like
€1.51 (tax excl.)
€1.83 (tax incl.)
A quick-connect fitting with a cylindrical threaded elbow joint is a connection component used primarily in pneumatic and low-pressure fluid systems. It allows for the quick and easy connection of a flexible or...
€17.50 (tax excl.)
€21.18 (tax incl.)
Pressure regulator for compressed air 1/8 - 1/4 Membrane operation. Max inlet pressure 16 bar. Flow rate at 6.3 bar 360 Nl/min Very easy to assemble, thanks to its special hooking system. Usable in versions for air...
€5.98 (tax excl.)
€7.24 (tax incl.)
Pressure gauge Ø40 center thread 1/8" The Ø40 pressure gauge with a 1/8" center thread is designed to measure the pressure of air, gases, or non-corrosive fluids in general applications. Its 40 mm diameter housing...
8 other products in the same category:
€1.87 (tax excl.)
€2.26 (tax incl.)
A regulator wall mounting bracket is a metal accessory, usually made of steel or aluminum, designed to secure a pressure regulator to a wall. Screws not included. Reduces the risk of damage to the regulator due to...
€17.50 (tax excl.)
€21.18 (tax incl.)
Pressure regulator for compressed air 1/8 - 1/4 Membrane operation. Max inlet pressure 16 bar. Flow rate at 6.3 bar 360 Nl/min Very easy to assemble, thanks to its special hooking system. Usable in versions for air...
€26.59 (tax excl.)
€32.17 (tax incl.)
A pressure regulator with integrated pressure gauge is a device designed to control and maintain constant working pressure in pneumatic or hydraulic systems, incorporating a pressure gauge that allows direct and...
€25.45 (tax excl.)
€30.79 (tax incl.)
A 1/4" battery pressure regulator is a device that controls and adjusts the compressed air pressure in a pneumatic system, especially in applications where several tools or equipment are used that require a constant...
€5.78 (tax excl.)
€6.99 (tax incl.)
A Ø40 1/8" side thread pressure gauge is used to measure the pressure of fluids, such as air, water or oil, within a system. Applications: Pneumatic industry, Hydraulic industry, Industrial processes or Boilers....
€20.00 (tax excl.)
€24.20 (tax incl.)
An in-line pressure regulator for Ø6 and Ø8 tubing is used to reduce and maintain constant pressure in a fluid system (usually air) despite variations in inlet pressure. Used for compressed air, it allows only a...
€5.98 (tax excl.)
€7.24 (tax incl.)
Pressure gauge Ø40 center thread 1/8" The Ø40 pressure gauge with a 1/8" center thread is designed to measure the pressure of air, gases, or non-corrosive fluids in general applications. Its 40 mm diameter housing...
€6.05 (tax excl.)
€7.32 (tax incl.)
Pressure gauge Ø50 center thread 1/8" A Ø50 pressure gauge with a 1/8" central thread is a measuring instrument used to indicate the pressure of fluids (air, water, oil or other compatible fluids) by means of an...
Recently Viewed
€120.27 (tax incl.)
€99.40 (tax excl.)
A JRP pilot-operated pressure regulator is a type of high-precision, high-flow pressure control valve designed to maintain a constant output pressure in a fluid system. It is used when large regulators are installed...
€53.00 (tax excl.)
€64.13 (tax incl.)
The STABILUS BLOC O LIFT 193607 800N spring is used in all applications where a folding or rotating movement is required to securely hold items in their final position. These springs prevent the application's weight...
€0.28 (tax excl.)
€0.34 (tax incl.)
A DIN 2353 L lock nut is a fundamental component in compression fittings with a shear ring that comply with the DIN 2353 standard. Its function is to hold and compress the shear ring against the rigid tube and the...
€319.00 (tax excl.)
€385.99 (tax incl.)
The NG-10 double overcenter valve is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...
€8.36 (tax excl.)
€10.12 (tax incl.)
A heavy-duty clamp is a fastening element designed to firmly and securely secure pipes, cables, or hoses. Unlike conventional clamps, heavy-duty clamps can withstand heavier loads and withstand more demanding...
€48.00 (tax excl.)
€58.08 (tax incl.)
A pressure washer gun It allows you to control and direct the high-pressure water jet using a trigger. Industrial, agricultural and intensive cleaning applications. Main features: Stainless steel metal parts. 250 bar....

Menu

Settings