Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
COMPRESSED AIR FILTER/REGULATOR

COMPRESSED AIR FILTER/REGULATOR

A compressed air filter/regulator is used to clean compressed air of impurities and control its outlet pressure. It is a compact device that combines these two functions in a single unit.

Applications: pneumatic tools, industrial automation, manufacturing processes, food and pharmaceutical industries.

Technical specifications:

  • Special preformed membrane.
  • Stability of the regulated pressure regardless of variations in the inlet.
  • Built-in overpressure relief.
  • Knob with regulation locking device.
  • High level of condensate separation.
  • Possibility of fixing to the wall, using the corresponding clamps.
  • Pressure fields: Filtration grade: 5 microns and 20 microns (standard).
  • Maximum inlet pressure: 16 bar
  • Flow rate: 1200 Nl/min.
  • Manual or semi-automatic condensate drainage device in standard version or with automatic discharge (PA).
  • Reinforced polyamide cup with external protection, equipped with a quick connection and anti-expulsion mechanism.
  • It comes with a pressure gauge and fixing bracket.
€33.47 (tax included)
€27.66 (tax excl.)
SELECT THE THREAD
  • 1/4"
  • 3/8"
  • 1/2"
  • 3/4"
  • 1"
Reference:
32030008
Description

compressed air filter/regulator.

Product Details
32030008
Comments
Related products
AUTOMATIC PURGE REPLACEMENT AUTOMATIC PURGE REPLACEMENT

€24.82 (tax excl.)
€30.03 (tax included)
An automatic filter purge replacement automatically removes condensation from the compressed air in the filters. This helps keep the filter functioning properly and prevents problems such as corrosion, airflow...
LUBRICATOR LUBRICATOR

€19.58 (tax excl.)
€23.69 (tax included)
A lubricator is installed in compressed air systems to add a controlled amount of lubricating oil to the air stream. Technical data sheet: Proportional type with oil mist. Constant supply. Suction guaranteed even with...
ASSEMBLY KIT ASSEMBLY KIT

€7.00 (tax excl.)
€8.47 (tax included)
An assembly kit is a set of components for connecting and securing multiple filter elements together, or for attaching these elements to other components of a filtration system. Technical sheet: Kit for joining...
5 micron FILTER CARTRIDGE 5 micron FILTER CARTRIDGE

€4.12 (tax excl.)
€4.99 (tax included)
A 5 micron filter cartridge is a replaceable component within a filtration system designed to remove solid particles and sediment from a fluid (either liquid or gas) that are equal to or greater than 5 µm in size....
WALL MOUNTING BRACKET WALL MOUNTING BRACKET

€1.87 (tax excl.)
€2.26 (tax included)
A regulator wall mounting bracket is a metal accessory, usually made of steel or aluminum, designed to secure a pressure regulator to a wall. Screws not included. Reduces the risk of damage to the regulator due to...
PRESSURE GAUGE Ø40 CENTRAL THREAD 1/8" PRESSURE GAUGE Ø40 CENTRAL THREAD 1/8"

€5.98 (tax excl.)
€7.24 (tax included)
Pressure gauge Ø40 center thread 1/8" The Ø40 pressure gauge with a 1/8" center thread is designed to measure the pressure of air, gases, or non-corrosive fluids in general applications. Its 40 mm diameter housing...
5 other products in the same category:
0.1 micron FILTER CARTRIDGE

€25.09 (tax excl.)
€30.36 (tax included)
A 0.1 micron filter cartridge is a replaceable component within a filtration system designed to remove extremely fine particles from a fluid (liquid or gas) that are equal to or greater than 0.1 µm Applications: Water...
WALL MOUNTING BRACKET

€1.87 (tax excl.)
€2.26 (tax included)
A regulator wall mounting bracket is a metal accessory, usually made of steel or aluminum, designed to secure a pressure regulator to a wall. Screws not included. Reduces the risk of damage to the regulator due to...
AUTOMATIC PURGE REPLACEMENT

€24.82 (tax excl.)
€30.03 (tax included)
An automatic filter purge replacement automatically removes condensation from the compressed air in the filters. This helps keep the filter functioning properly and prevents problems such as corrosion, airflow...
FILTER/REGULATOR WITH INTEGRATED MANOMETER

€38.20 (tax excl.)
€46.22 (tax included)
Filter/regulator with integrated pressure gauge. Special preformed membrane. Stability of the regulated pressure regardless of variations in inlet. Built-in overpressure relief. Knob with regulation locking device....
5 micron FILTER CARTRIDGE

€4.12 (tax excl.)
€4.99 (tax included)
A 5 micron filter cartridge is a replaceable component within a filtration system designed to remove solid particles and sediment from a fluid (either liquid or gas) that are equal to or greater than 5 µm in size....
Recently Viewed
COMPRESSED AIR FILTER/REGULATOR

€33.47 (tax included)
€27.66 (tax excl.)
A compressed air filter/regulator is used to clean compressed air of impurities and control its outlet pressure. It is a compact device that combines these two functions in a single unit. Applications: pneumatic...
Long Chipping Hammer 5503H

€65.45 (tax excl.)
€79.19 (tax included)
The 5503H long chipping hammer is an industrial power tool for demolition, material removal, and drilling work on a variety of surfaces. Its robust and powerful design, combined with its various chisels, makes it an...
SLIDING FLOW DIVIDER

€113.56 (tax excl.)
€137.41 (tax included)
Sliding flow divider A spool flow divider is a type of hydraulic valve used to split an oil flow into two or more equal flows. The valve has a spool that moves along an orifice, dividing the oil flow into two or more...
AXIS 20 ANGULAR RETURN

€379.50 (tax excl.)
€459.20 (tax included)
20 axis angular transmission Possibility in 2 and 3 ways Ratio 1:1 or 2:1 (to be specified) The gearboxes have been designed for an input speed (axis A) of 1400 rpmEsta This speed, with the applicable power,...

Menu

Please sign in first.

Sign in