Click for more products.
No products were found.

FILTER/REGULATOR WITH INTEGRATED MANOMETER

Filter/regulator with integrated pressure gauge.

  • Special preformed membrane.
  • Stability of the regulated pressure regardless of variations in inlet.
  • Built-in overpressure relief.
  • Knob with regulation locking device.
  • High level of condensate separation.
  • Pressure fields: Filtration grade: 25 microns (standard).
  • Maximum inlet pressure 10 bar
  • Flow rate 1200 Nl/min.
  • Manual or semi-automatic condensate drainage device in standard version.
  • Regulation range 0.5 - 8.5 bar.
  • Temperature 5ºC / 60ºC

Read moreShow less
€46.22 (tax incl.)
€38.20 (tax excl.)
SELECT THE THREAD
  • 1/4"
  • 3/8"
  • 1/2"
  • 1"
Reference:
32342313
Description
Product Details
32342313
Comments (0)
You may also like
€24.82 (tax excl.)
€30.03 (tax incl.)
An automatic filter purge replacement automatically removes condensation from the compressed air in the filters. This helps keep the filter functioning properly and prevents problems such as corrosion, airflow...
€19.58 (tax excl.)
€23.69 (tax incl.)
A lubricator is installed in compressed air systems to add a controlled amount of lubricating oil to the air stream. Technical data sheet: Proportional type with oil mist. Constant supply. Suction guaranteed even with...
€7.00 (tax excl.)
€8.47 (tax incl.)
An assembly kit is a set of components for connecting and securing multiple filter elements together, or for attaching these elements to other components of a filtration system. Technical sheet: Kit for joining...
€4.12 (tax excl.)
€4.99 (tax incl.)
A 5 micron filter cartridge is a replaceable component within a filtration system designed to remove solid particles and sediment from a fluid (either liquid or gas) that are equal to or greater than 5 µm in size....
€1.87 (tax excl.)
€2.26 (tax incl.)
A regulator wall mounting bracket is a metal accessory, usually made of steel or aluminum, designed to secure a pressure regulator to a wall. Screws not included. Reduces the risk of damage to the regulator due to...
5 other products in the same category:
€25.09 (tax excl.)
€30.36 (tax incl.)
A 0.1 micron filter cartridge is a replaceable component within a filtration system designed to remove extremely fine particles from a fluid (liquid or gas) that are equal to or greater than 0.1 µm Applications: Water...
€1.87 (tax excl.)
€2.26 (tax incl.)
A regulator wall mounting bracket is a metal accessory, usually made of steel or aluminum, designed to secure a pressure regulator to a wall. Screws not included. Reduces the risk of damage to the regulator due to...
€27.66 (tax excl.)
€33.47 (tax incl.)
A compressed air filter/regulator is used to clean compressed air of impurities and control its outlet pressure. It is a compact device that combines these two functions in a single unit. Applications: pneumatic...
€4.12 (tax excl.)
€4.99 (tax incl.)
A 5 micron filter cartridge is a replaceable component within a filtration system designed to remove solid particles and sediment from a fluid (either liquid or gas) that are equal to or greater than 5 µm in size....
€24.82 (tax excl.)
€30.03 (tax incl.)
An automatic filter purge replacement automatically removes condensation from the compressed air in the filters. This helps keep the filter functioning properly and prevents problems such as corrosion, airflow...
Recently Viewed
€46.22 (tax incl.)
€38.20 (tax excl.)
Filter/regulator with integrated pressure gauge. Special preformed membrane. Stability of the regulated pressure regardless of variations in inlet. Built-in overpressure relief. Knob with regulation locking device....
€16.00 (tax excl.)
€19.36 (tax incl.)
Lubricating oil reduces friction and wear between moving surfaces, protects against wear and corrosion, and dissipates heat in mechanical components (engines, transmissions, machinery, tools). Applications: Internal...
€6.78 (tax excl.)
€8.20 (tax incl.)
An EPDM sheet is characterized by its high resistance to atmospheric, chemical, and thermal agents. It is commonly used for waterproofing, cladding, sealing, and insulation. Technical specifications: Suitable for...
€9.93 (tax excl.)
€12.02 (tax incl.)
A tank support bracket firmly and stably holds and secures a compressed air tank. These brackets are essential in any installation using compressed air. They allow the tank to be fixed to the floor or wall. Technical...

Menu

Settings