€16.12
(tax incl.)
€13.32
(tax excl.)
Anodized slide. Nickel-plated brass body. Discharge to 3/2-way drive.
Filter By
Filter By
PNEUMATIC AUXILIARY VALVES
Filter By
€11.36
(tax incl.)
€9.39
(tax excl.)
Nickel-plated brass body. NBR gasket. Temperature -10 / +70ªC. Maximum pressure 12 bar.
€27.95
(tax incl.)
€23.10
(tax excl.)
The direct spring flat seat adjustable safety valve is a device that releases pressure from a system when the pressure reaches a preset level. When the pressure in the system exceeds the valve setting pressure, the...
€5.30
(tax incl.)
€4.38
(tax excl.)
Nickel-plated brass. Filtration degree 300 microns. Stainless filter sieve Possibility of changing the filter element.
€54.45
(tax incl.)
€45.00
(tax excl.)
Nominal flow rate (6 bar)-1/8 = 750 Nl/min 1/4 = 1420 Nl/min Temperatures-Minimum temperature: -20 °C Maximum temperature: +80 °C Pressures - Minimum pressure: 0.3 bar Maximum pressure: 10 bar (1 MPa) Piloting Tube Ø...
€38.76
(tax incl.)
€32.03
(tax excl.)
The progressive start fitting manages to pressurize the actuator gradually, avoiding water hammer caused by rapid pressurization. Regulation is possible by means of a screw in its head. The connection is via...
€31.42
(tax incl.)
€25.97
(tax excl.)
Stroke end sensor Detects a pressure drop by issuing a command signal (S). Especially applicable as a pneumatic limit switch in actuators, mounted directly on it, it detects the end of the stroke by emitting a pilot...
€27.61
(tax incl.)
€22.82
(tax excl.)
Unidirectional flow regulator. Anodized aluminum body Brass regulation screw. Working pressure from 2 to 10 bar. Temperature 0ºC / 70ªC
€27.61
(tax incl.)
€22.82
(tax excl.)
Bidirectional flow regulator. Anodized aluminum body Brass regulation screw. Working pressure from 2 to 10 bar. Temperature 0ºC / 70ªC
€6.05
(tax incl.)
€5.00
(tax excl.)
York Check Valve Brass body. NBR gasket. STAINLESS STEEL spring 302 Polyamide shutter. Temperature -20ºC / +100ºC Mounting in any position.
€96.80
(tax incl.)
€80.00
(tax excl.)
Unidirectional in-line flow regulator.
Manufactured in INOX-316
FKM internal seal
Includes fixing nut for panel.
Gas thread conforming to ISO 228 Class A
Fluids for the food and chemical industry.
Pressure 10 bar.
€11.10
(tax incl.)
€9.17
(tax excl.)
Stainless steel 316 material. Filtration degree 1 mm. Stainless filter sieve Possibility of changing the filter element. Temperature -30ºC / 280ºC. Pressure 40 bar.
€88.09
(tax incl.)
€72.80
(tax excl.)
INOX-316 quick exhaust Available in the following threads 1/8 - 1/4 - 3/8 - 1/2 Gasket in 1/8 - 1/4 viton 3/8 - 1/2 polyurethane
€17.85
(tax incl.)
€14.75
(tax excl.)
Buy custom nickel-plated brass non-return valve. Nickel-plated brass body. NBR gasket PN 20 bar, STAINLESS STEEL spring. Opening pressure 0.05 bar. Temperature -10ºC / +70ºC
€19.89
(tax incl.)
€16.44
(tax excl.)
The stainless steel non-return valve is used to make a flow of liquid or gases go in one direction within a circuit and completely close the flow in the other direction. It is made entirely of STAINLESS STEEL. Data...
Showing 1-17 of 17 item(s)
Auxiliary pneumatic valves. Buy pneumatic valves online at the best price
Pneumatic distributors are mechanical devices that direct, manipulate and regulate the movement of compressed air; the closing or enabling, the direction and the flow of compressed air, in all its devices or peripherals.
Types of pneumatic distributors
The types of pneumatic auxiliary valves could be selected from:
- Flow regulating valves: Using a knob, this type of valve regulates the speed of a cylinder or peripheral associated with it.
- Locking valves: This type of valve, through an internal device, prevents a cylinder from falling suddenly in the event of a breakage or accident, thus avoiding breakages or damage that could be caused.
- Slide valves: These valves are used to empty a compressed air circuit, using a slide.
- Non-return or check valves: These valves leave the passage of compressed air free in one direction and prevent passage in the opposite direction.
- Safety valves: The safety valve is a safety device used to evacuate the necessary fluid flow from a pressure vessel, installation or equipment, in such a way that it does not constantly exceed the maximum admissible pressure. This valve defines the maximum pressure, preventing it from exceeding it; a spring opens to let excess pressure escape.
- Logic valves: There are a series of valves to control certain maneuvers used for pneumatic piloting, such as circuit selectors, NOT valves, simultaneity valves, sensors, quick exhausts, etc.
They are simple elements and easy to assemble. It requires little maintenance and is economical to install. Long durability, pneumatic distributors are safe, do not have explosive characteristics or produce excessive heat.
The compressed air used to move the pneumatic cylinders does not generate water hammer, which reduces breakdowns or damage to the equipment. They are used in practically all types of industries, where automation is present.
