Click for more products.
No produts were found.
Click for more products.
No produts were found.

PROGRESSIVE START FITTING

The progressive start fitting manages to pressurize the actuator gradually, avoiding water hammer caused by rapid pressurization.

  • Regulation is possible by means of a screw in its head.
  • The connection is via cylindrical male thread.
  • Pressure 3 - 10 bar.
  • Temperature 0 / 70ºC.

SUPPLIED WITHOUT THE FEMALE BALL FITTING

Buy online PROGRESSIVE START FITTING at the best price

€37.09 (tax incl.)
€30.65 (tax excl.)
SELECT THREAD
Reference:
15140008
Consult price for large quantities
Product Details
15140008
Reference THREAD Price Add to cart
15140012 3/8"
€32.03
15140008 1/4"
€30.65
12 other products in the same category:
€169.40 (tax incl.)
€140.00 (tax excl.)
Wika A-10 pressure transmitter 12725111 analog output. 1/4" thread Pressure 0 - 250 bar Accuracy 0.5% Supply voltage 14 - 30 V 0-10V output IP65 protection Connection DIN-175301-803 A
€19.80 (tax incl.)
€16.36 (tax excl.)
Sectioning valve (ON/OFF) by operating the cam. Available in 3-way (specified at the end of the reference), In this latest version, when the cam is actuated, the discharge to the atmosphere occurs. Available in Ø 6...
€26.90 (tax incl.)
€22.23 (tax excl.)
Stroke end sensor Detects a pressure drop by issuing a command signal (S). Especially applicable as a pneumatic limit switch in actuators, mounted directly on it, it detects the end of the stroke by emitting a pilot...
€19.76 (tax incl.)
€16.33 (tax excl.)
The stainless steel non-return valve is used to make a flow of liquid or gases go in one direction within a circuit and completely close the flow in the other direction. It is made entirely of STAINLESS STEEL. Data...
€96.80 (tax incl.)
€80.00 (tax excl.)
Stainless steel pressure transmitter Converts a pressure signal into a 4-20 mA output 1/2" Gas thread Reduced measurements. 4-20 mA output (2 wires) Power supply 12-28 V DC DIN-43650-C electrical connector Protection...
€61.71 (tax incl.)
€51.00 (tax excl.)
Unidirectional in-line flow regulator. Manufactured in INOX-316 FKM internal seal Includes fixing nut for panel. Gas thread conforming to ISO 228 Class A Fluids for the food and chemical industry. Pressure 10 bar.
€10.71 (tax incl.)
€8.85 (tax excl.)
Anodized slide. Nickel-plated brass body. Discharge to 3/2-way drive.
€21.30 (tax incl.)
€17.60 (tax excl.)
Safety valve calibrated and sealed with a security seal according to European regulation PED 9723/23/CE that regulates pressure components. Supplied with corresponding CE certificate. Manual safety ring. Default...
€6.05 (tax incl.)
€5.00 (tax excl.)
York Check Valve Brass body. NBR gasket. STAINLESS STEEL spring 302 Polyamide shutter. Temperature -20ºC / +100ºC Mounting in any position.
€35.21 (tax incl.)
€29.10 (tax excl.)
Sprayer that acts as a venturi, projecting the liquid, together with air, causing a mist, where we can regulate the fan it produces. Aluminum Body Possibility of mounting on battery. NBR gaskets M-5 threads 380º...

Menu