Click for more products.
No products were found.

FILTER AND STAINLESS STEEL

A stainless steel Y-strainer is used to protect equipment and systems by removing impurities from fluids, such as liquids or gases. It allows the fluid to flow through the filter with minimal restriction, while facilitating the accumulation of impurities at the bottom.

It is used in a variety of industries including chemical industry, food industry, pharmaceutical industry, hydraulic and pneumatic systems and irrigation systems.

Technical data sheet:

  • Made of 316 stainless steel.
  • Filtration grade 1 mm.
  • Stainless steel filter sieve.
  • Possibility of changing the filter element.
  • Temperature -30ºC / 280ºC.
  • Pressure 40 bar.
Read moreShow less
€10.87 (tax incl.)
€8.98 (tax excl.)
SELECT THE THREAD
  • 1/4"
  • 3/8"
  • 1/2"
  • 3/4"
  • 1"
  • 1-1/4"
  • 1-1/2"
  • 2"
Reference:
150800081
Description

Y stainless steel filter

Read moreShow less
Product Details
150800081
Comments (0)
6 other products in the same category:
€16.33 (tax excl.)
€19.76 (tax incl.)
The stainless steel check valve is used to ensure that a liquid or gas flow is directed in one direction within a circuit and completely shuts off flow in the other direction. It is made entirely of stainless steel....
€80.00 (tax excl.)
€96.80 (tax incl.)
The Inox pressure transmitter is an electronic device that measures the pressure of a fluid (liquid or gas) and converts it into a standardized electrical signal (usually 4-20 mA or 0-10 V) that can be read and used...
€56.80 (tax excl.)
€68.73 (tax incl.)
A 316 stainless steel quick release valve is used to accelerate the discharge of compressed air from a cylinder or other pneumatic actuator. Its purpose is to accelerate the return speed or movement of a pneumatic...
€18.92 (tax excl.)
€22.89 (tax incl.)
A stainless steel sampling valve is used to extract small quantities of fluid from an industrial process or piping system, in order to perform analysis or quality control. Common applications: Food and beverage...
€51.00 (tax excl.)
€61.71 (tax incl.)
A stainless steel one-way flow regulator is designed to control and adjust airflow in pneumatic circuits. It allows flow to be regulated in one direction while maintaining free or less restricted flow in the opposite...
€180.00 (tax excl.)
€217.80 (tax incl.)
The stainless steel safety valve, set at 5 bar, automatically releases system pressure when it exceeds 5 bar. Applications: Hydraulic systems, pneumatic systems, boilers and industrial equipment. Technical...
Recently Viewed
€10.87 (tax incl.)
€8.98 (tax excl.)
A stainless steel Y-strainer is used to protect equipment and systems by removing impurities from fluids, such as liquids or gases. It allows the fluid to flow through the filter with minimal restriction, while...
€10.92 (tax excl.)
€13.21 (tax incl.)
A 45° elbow silicone hose is a silicone tube for engine cooling with good resistance to ozone and atmospheric conditions. It is resistant to corrosion caused by the cold and heat exchanges of organic antifreezes....
€184.00 (tax excl.)
€222.64 (tax incl.)
LUB5 electromechanical automatic lubricator. Volume 120 ml. Dosed volume 0.24 ml. Pressure 10 bar. Temperature -20º / 60ºC. 1/4" male thread. It can be mounted in any position. For fats or oils of NLGI 2 consistency...
€1.33 (tax excl.)
€1.61 (tax incl.)
A female-to-male reducing fitting is used to join two sections of pipe with different diameters. Its function is to adapt the diameter of one pipe to another of smaller diameter, ensuring a smooth and safe transition...
€23.71 (tax excl.)
€28.69 (tax incl.)
A 3/4" flat outlet nozzle is a terminal fitting for Loc-Line hoses that provides a wide, flat fluid stream with increased flow rate. Applications: Linear fluid distribution at higher flow rates, Efficient linear...
€106.00 (tax excl.)
€128.26 (tax incl.)
A desulfurizing silencer with a microfilter serves to reduce the noise generated by the exhaust of pressurized air and, in turn, eliminate oil mist and other impurities present in the air. Applications: Pneumatic...

Menu

Settings