Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
FLAT OUTLET NOZZLE 3/4
FLAT OUTLET NOZZLE 3/4
FLAT OUTLET NOZZLE 3/4
FLAT OUTLET NOZZLE 3/4
FLAT OUTLET NOZZLE 3/4
FLAT OUTLET NOZZLE 3/4
FLAT OUTLET NOZZLE 3/4
FLAT OUTLET NOZZLE 3/4

FLAT OUTLET NOZZLE 3/4

A 3/4" flat outlet nozzle is a terminal fitting for Loc-Line hoses that provides a wide, flat fluid stream with increased flow rate.

Applications: Linear fluid distribution at higher flow rates, Efficient linear cooling of large or multiple parts, Chip blowing over large areas with increased power, Larger scale general cleanup applications, Creating wider and more powerful air or liquid curtains.

Technical sheet:

  • Vibration resistant
  • Absolutely hermetic
  • Unalterable to normal chemical agents
  • The particular design allows the tube diameter to be maintained without interference in the fluid flow.
  • LOC-LINE is not a conductor of electricity.
  • Multiple combinations, through its assembly system.
€28.69 (tax included)
€23.71 (tax excl.)
EXTENT
  • 75 x 5
UNITS
Reference:
56060133
Description

3/4 flat outlet nozzle

BOQUILLA SALIDA PLANA 34 61507

Product Details
56060133
Comments
12 other products in the same category:
MINI FLAT OUTLET NOZZLE

€20.29 (tax excl.)
€24.55 (tax included)
Mini Flat Outlet Nozzle is a compact terminal fitting for Loc-Line hoses. This flat outlet has smaller dimensions. Applications: Precise fluid application in tight areas, Linear cooling of small components, Blowing...
ADAPTER WITH CENTER OUTLET

€16.91 (tax excl.)
€20.46 (tax included)
The center outlet adapter is designed to create a branch or additional outlet in the center of a hose segment. This center outlet allows you to divert a portion of the main flow or connect an additional accessory....
FLAT OUTLET NOZZLE 1/2

€16.91 (tax excl.)
€20.46 (tax included)
A 1/2" flat outlet nozzle is a terminal fitting for the Loc-Line modular hose system. The nozzle's end opening is rectangular or elongated. Applications: linear cooling of components, chip blowing over extended areas,...
1/4 THREAD ADAPTER

€105.23 (tax excl.)
€127.33 (tax included)
A 1/4" thread adapter is used to connect a Loc-Line hose of a specific diameter to a component or system that has a 1/4" threaded connection. Technical sheet: Vibration resistant Absolutely hermetic Unalterable to...
FEMALE THREADED TAP

€27.05 (tax excl.)
€32.73 (tax included)
A female-threaded faucet incorporates a flow control valve (the "tap") and an internal threaded connection. This acts as a stopcock, allowing you to turn the flow on, off, or adjust it. Technical sheet: Vibration...
3/4 MALE THREAD ADAPTER

€15.22 (tax excl.)
€18.42 (tax included)
3/4 male thread adapter Technical sheet: Vibration resistant Absolutely hermetic Unalterable to normal chemical agents The particular design allows the tube diameter to be maintained without interference in the fluid...
PLUG

€11.90 (tax excl.)
€14.40 (tax included)
A Loc-Line plug is a fitting used with the Loc-Line modular hose system. It serves to close or block the end of a Loc-Line hose. It prevents the entry of contaminants when the end is not connected to another...
ASSEMBLY PLIERS

€30.44 (tax excl.)
€36.83 (tax included)
The assembly pliers are a tool specifically designed to facilitate the assembly and disassembly of the modular segments that make up the Loc-Line articulated hose system. Technical sheet: Vibration resistant...
1/2" ARTICULATED BALL JOINT

€631.20 (tax excl.)
€763.75 (tax included)
A 1/2" swivel is a component within the Loc-Line modular hose system that allows for a flexible and orientable connection with a nominal connection size of 1/2". Technical sheet: Vibration resistant. Completely...
BRANCHING AND

€102.61 (tax excl.)
€124.16 (tax included)
A Y-branch allows a main fluid flow to be divided into two separate flows. All three ends are Loc-Line connections typically of the same diameter. Technical sheet: Vibration resistant Absolutely hermetic Unalterable...
ADJUSTABLE FLAT NOZZLE 1/2

€27.05 (tax excl.)
€32.73 (tax included)
An adjustable 1/2 flat nozzle incorporates a linear mechanism to adjust the flow rate or shape of the fluid jet. Applications: Linear fluid distribution with flow control, Linear component cooling with variable flow,...
SILICONE BELLOWS Ø30 Ø50 x 250

€6.00 (tax excl.)
€7.26 (tax included)
Silicone bellows Ø30 Ø50 x 250 are a flexible and durable silicone component used to protect, seal, and connect elements. Silicone is flexible, resistant to high and low temperatures, chemically inert, impermeable,...
Recently Viewed
FLAT OUTLET NOZZLE 3/4

€28.69 (tax included)
€23.71 (tax excl.)
A 3/4" flat outlet nozzle is a terminal fitting for Loc-Line hoses that provides a wide, flat fluid stream with increased flow rate. Applications: Linear fluid distribution at higher flow rates, Efficient linear...
RED MUSHROOM SAFETY PUSH BUTTON Ø60

€32.00 (tax excl.)
€38.72 (tax included)
A red mushroom safety push button Ø60 is a manually operated instrument used for To quickly and safely stop machinery or industrial processes in emergency situations. Once activated, the button remains locked,...
45° ANGLED GREASE FITTING H2

€78.62 (tax excl.)
€95.13 (tax included)
A 45° angled grease fitting H2 is installed on machines and equipment to allow the injection of lubricant under pressure at a lubrication point. The opening through which the grease is injected is oriented at a 45°...
JIC WELDABLE MALE JOINT

€1.53 (tax excl.)
€1.85 (tax included)
A JIC male weld fitting is a type of hydraulic fitting used to create a robust, sealed connection in high-pressure systems. It features one end with a JIC male thread and the other end designed to be permanently...
BUTTON GRIP EE1B

€30.00 (tax excl.)
€36.30 (tax included)
1-button joystick-type handle to control 1 coil. 2-wire cable A single push button. M-10x150 threaded fixing.

Menu

Please sign in first.

Sign in