Click for more products.
No produts were found.
Click for more products.
No produts were found.

BIDIRECTIONAL FLOW REGULATOR

A bi-directional flow regulator is used to control the speed of an actuator (such as a cylinder or motor) by reducing the fluid flow in both directions of flow through the valve.

Common applications: hydraulics and pneumatics.

Technical sheet:

  • Anodized aluminum body
  • Brass adjustment screw.
  • Working pressure from 2 to 10 bar.
  • Temperature 0ºC / 70ºC
€11.20 (tax included)
€9.26 (tax excl.)
SELECT THE THREAD
  • M5
  • 1/8"
  • 1/4"
  • 3/8"
  • 1/2"
Reference:
15030002
Description

bidirectional flow regulator

Product Details
15030002
Comments
12 other products in the same category:
€10.14 (tax excl.)
€12.27 (tax included)
A drain filter with tap combines the filtration and drain functions in a single device. Applications: manufacturing industry, automotive industry, food and pharmaceutical industry and pneumatic systems in general....
€48.00 (tax excl.)
€58.08 (tax included)
A three-way L-shaped stainless steel ball valve, ISO-5211, controls fluid flow in three directions: inlet, outlet, and shutoff. The L-shaped valve allows for right-angle flow, optimizing installation space. It...
€60.00 (tax excl.)
€72.60 (tax included)
A polyamide sprayer acts as a venturi, together with pressurized air, projecting the liquid and creating a mist, with the ability to regulate the flow rate it produces. Applications: Gardening and agriculture,...
€180.00 (tax excl.)
€217.80 (tax included)
The stainless steel safety valve, set at 5 bar, automatically releases system pressure when it exceeds 5 bar. Applications: Hydraulic systems, pneumatic systems, boilers and industrial equipment. Technical...
€16.33 (tax excl.)
€19.76 (tax included)
The stainless steel check valve is used to ensure that a liquid or gas flow is directed in one direction within a circuit and completely shuts off flow in the other direction. It is made entirely of stainless steel....
€6.56 (tax excl.)
€7.94 (tax included)
The PN-25 brass ball valve with bleed valve incorporates a purge system that allows the fluid contained in the valve or pipe to drain. This facilitates maintenance, cleaning, and freeze prevention. Common...
€238.42 (tax excl.)
€288.49 (tax included)
The wafer-type pneumatic one-way knife gate valve, also known as a gate or sluice gate, is suitable for liquids containing a maximum of 5% suspended solids. If used for gravity discharge of dry solids, it is...
€17.60 (tax excl.)
€21.30 (tax included)
A 1/2" calibrated safety valve is used to automatically release the pressure of a system when it exceeds a preset value (the calibration). Its function is to prevent the system from being damaged by overpressure....
€28.00 (tax excl.)
€33.88 (tax included)
The 1/8" pivot valve allows you to precisely control the flow of compressed air. Its operation is based on a pivot mechanism that allows you to open and close the air flow. Applications: Industrial automation,...
€16.78 (tax excl.)
€20.30 (tax included)
A 3/2-way air relief valve is a pneumatic valve specifically designed to quickly release compressed air from a system or circuit to the atmosphere or a tank. It consists of three ports (an air inlet, an outlet, and an...
€5.00 (tax excl.)
€6.05 (tax included)
York brass non-return valve A York brass non-return valve is a flow control device designed to allow fluid to pass in only one direction and automatically prevent backflow, made of brass and with a York type...
€6.30 (tax excl.)
€7.62 (tax included)
A 6-bar safety valve for water automatically releases excessive pressure in a water-handling system, preventing damage to equipment, pipes, or vessels. Its function is a pressure relief mechanism that activates when...
Recently Viewed
€11.20 (tax included)
€9.26 (tax excl.)
A bi-directional flow regulator is used to control the speed of an actuator (such as a cylinder or motor) by reducing the fluid flow in both directions of flow through the valve. Common applications: hydraulics and...

Menu