REED SENSOR CABLE 2mt

The 2m reed switch is a type of magnetic switch used to detect the presence or absence of a magnetic field. It is a passive device that does not require a power supply to function as a sensor and is activated by bringing a magnet close to it.

Applications: Industrial automation, Security systems, Accountants and Robotics.

Technical sheet:

Electrical input: Direct 2-wire output. Normally open (The circuit is open when there is no magnet and closes when the magnet is brought close)
Voltage 5-240V DC/AC
Charging current: 5 to 50 mA. Max. 100 mA
Response time 0.1 ms
Operating temperature -10ºC - 70ºC
2-meter PUR cable resistant to cutting oils.
Signal by red LED diode.

€18.50 (tax included)

€15.29 (tax excl.)

Reference:

5200

Description
Comments

Description

Reed sensor cable 2mt

SENSOR REED 2mt. CABLE

Product Details

Reference 5200

Comments

8 other products in the same category:

SENSOR SUPPORT ROD CYLINDER Ø32-Ø63

€6.40 (tax excl.)

€7.74 (tax included)

Rod cylinder sensor support Ø32-Ø63 It is used to securely attach a sensor to an ISO 6432 pneumatic cylinder with a rod diameter ranging from 32 to 63 mm. Ensures that the sensor remains in the correct position,...

PNP SENSOR CABLE 2mt AND 3 WIRES

€32.13 (tax excl.)

€38.87 (tax included)

A 2-meter, 3-wire PNP sensor detects the presence or absence of an object without physical contact. It emits an electrical signal when an object is within its detection range. Applications: Part detection in...

PNP SENSOR M-8 CONNECTOR

€24.96 (tax excl.)

€30.20 (tax included)

The PNP sensor with an M-8 connector is used to detect the presence of a metallic object or the position of a mechanical element and transmit this information to a control system. PNP refers to the sensor output:...

REED SENSOR M-8 CONNECTOR

€20.59 (tax excl.)

€24.92 (tax included)

An M-8 connector reed sensor is a magnetic switch that detects the presence of a magnetic field, and whose characteristic is that its electrical connection is not through loose cables, but through an M8 connector....

KOGANEI CS3B SENSOR

€36.40 (tax excl.)

€44.04 (tax included)

The Koganei CS3B sensor is a magnetic sensor primarily used to detect the position of Koganei pneumatic cylinders. It is essential in industrial automation systems because it allows for accurately determining when a...

M-8 CABLE EXTENSION

€8.74 (tax excl.)

€10.57 (tax included)

The M-8 cable extension is useful in industrial environments that use sensors and actuators with M-8 connectors. It allows the cable to be extended, allowing devices to be located at a greater distance from the power...

REED SENSOR CABLE 5 Mt

€18.79 (tax excl.)

€22.74 (tax included)

REED sensor cable 5 mt Technical sheet: Electrical input: Direct output 2 wires. Normally open. Voltage 5-240V DC/AC Charging current: 5 to 50 mA. Max. 100 mA Response time 0.1 ms Operating temperature -10ºC - 70ºC...

ISO-6432 CYLINDER SENSOR SUPPORT

€4.79 (tax excl.)

€5.80 (tax included)

Sensor support for ISO-6432 cylinders The bracket is essential in pneumatic systems using ISO-6432 cylinders. Its main function is to securely and accurately fix a sensor to a pneumatic cylinder. Ensures an exact...