Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
3-PIECE PRESS STAINLESS STEEL FITTING
3-PIECE PRESS STAINLESS STEEL FITTING
3-PIECE PRESS STAINLESS STEEL FITTING
3-PIECE PRESS STAINLESS STEEL FITTING
3-PIECE PRESS STAINLESS STEEL FITTING
3-PIECE PRESS STAINLESS STEEL FITTING

3-PIECE PRESS STAINLESS STEEL FITTING

A 3-piece stainless steel press fitting is used in piping systems that require high corrosion resistance and secure connections, especially in sanitary and industrial applications. It facilitates pipe assembly and disassembly.

Applications: Food and beverage industry, Pharmaceutical and cosmetics industry, Pharmaceutical and cosmetics industry, Drinking water and water treatment systems, Heating and cooling systems.

Technical sheet:

  • INOX-316 fitting for pressing.
  • Available tube diameters 15-18-22-28-35-42-54
  • EPDM gasket available (domestic water, heating, fire protection, compressed air (oil-free)
  • VITON gasket available (oils, hydrocarbons (except diesel), solar installations, compressed air.
  • For DVGW GW 541 UNE-EN-10088 tube
  • Pressure 16 bar at 90ºC
  • Temperature 120ºC
  • Various certifications and approvals, depending on the sector.
€17.71 (tax included)
€14.64 (tax excl.)
DIAMETERS
  • Ø 15
  • Ø 18
  • Ø 22
  • Ø 28
  • Ø 35
  • Ø 42
  • Ø 54
Reference:
58080016
Description

3-piece stainless steel press fitting

Product Details
58080016
Comments
12 other products in the same category:
CENTRAL FEMALE TUBE PRESS INOX

€8.12 (tax excl.)
€9.83 (tax included)
A stainless steel press-fit female center pipe tee is distinguished by its female branch connection, unlike the other two ends, which are press-fit. It allows the connection of three pipe sections, with one section...
90º FEMALE TUBE ELBOW WITH STAINLESS STEEL PRESS FIXING

€8.38 (tax excl.)
€10.14 (tax included)
A 90º female pipe elbow with stainless steel press fitting allows a 90º turn in the piping system and can be anchored to a surface (wall, floor, etc.) to provide stability to the installation. Technical sheet:...
M-H PRESS INOX REDUCTION

€4.13 (tax excl.)
€5.00 (tax included)
An MH press stainless steel reducer is a type of fitting used in piping systems to connect two pipes of different diameters. A larger diameter pipe is always connected to a smaller diameter pipe. Common applications:...
STAINLESS STEEL ARCH

€3.00 (tax excl.)
€3.63 (tax included)
A stainless steel eyebolt is a fastening element made of stainless steel. Its purpose is to hold and anchor pipes, tubes, cables, or conduits to structures, profiles, supports, or surfaces. Applications: Industrial...
STAINLESS STEEL PRESS MALE THREAD TUBE UNION

€7.05 (tax excl.)
€8.53 (tax included)
A male threaded stainless steel press pipe union allows two or more pipe elements to be connected. The connection to the smooth pipe is made using a radial press system. Applications: Plumbing and heating...
STAINLESS STEEL PRESS FEMALE THREAD TUBE UNION

€7.46 (tax excl.)
€9.03 (tax included)
A stainless steel female threaded press pipe union allows sections of pipe to be joined. Applications: drinking water installations, heating and cooling systems, solar applications, compressed air systems,...
STRAIGHT H-H JOINT

€2.98 (tax excl.)
€3.61 (tax included)
A straight HH union is a connector used in piping systems, designed to join two pipes in a straight line using a press connection system. Technical sheet: INOX-316 fitting for pressing. Available tube diameters...
90º H-H CURVE PRESS INOX

€4.39 (tax excl.)
€5.31 (tax included)
A 90º HH press inox bend is a pipe fitting designed to make a 90º turn in a pipe line. Typical applications: Sanitary installations, Heating systems, Food industry, Chemical industry and Naval sector. Technical sheet:...
EPDM PRESS FITTING GASKET

€0.21 (tax excl.)
€0.25 (tax included)
An EPDM press-fit gasket is a replacement for stainless steel fittings with a press connection. Its function is to create a durable, airtight seal between the fitting and the pipe, preventing fluid or gas leaks....
220V ELECTROHYDRAULIC RADIAL PRESS

€1,400.00 (tax excl.)
€1,694.00 (tax included)
A 220V electrohydraulic radial press is used to make radial joints in pipes and fittings. These joints are achieved by circumferentially compressing a sleeve or ring onto the pipe and fitting. Applications: plumbing,...
STAINLESS STEEL PRESS CAP

€4.52 (tax excl.)
€5.47 (tax included)
A stainless steel press plug is used to seal or close the end of a pipe or fitting, made of stainless steel and designed for piping systems that use "push-in" connections. Applications: Food and beverage industry,...
UNION TUBE FEMALE THREAD SWIVEL PRESS INOX

€9.85 (tax excl.)
€11.92 (tax included)
A press stainless steel swivel female thread pipe union is designed to flexibly and securely connect a pipe with a female thread to another component. It allows for a certain amount of rotation, facilitating the...
Recently Viewed
3-PIECE PRESS STAINLESS STEEL FITTING

€17.71 (tax included)
€14.64 (tax excl.)
A 3-piece stainless steel press fitting is used in piping systems that require high corrosion resistance and secure connections, especially in sanitary and industrial applications. It facilitates pipe assembly and...
GEKA BOARD

€0.15 (tax excl.)
€0.18 (tax included)
The GEKA gasket is a sealing element for use with GEKA-type quick-connect fittings. Its main function is to ensure a secure connection between two couplings. Applications: water networks, irrigation and industrial...
VALVE 5/3 CENTER TO EXHAUST VE14 1501C00013

€83.00 (tax excl.)
€100.43 (tax included)
Sub-D multipolar integrated system Simplicity and versatility of mounting and wiring. Double electropilot, housed on the same side, reducing the size of the battery. Wide range of valves and modules, threads and...
90º SCH-40 A-316L ELBOW

€3.58 (tax excl.)
€4.33 (tax included)
A 90º SCH-40 A-316L elbow is an industrial pipe fitting, designed to change the direction of fluid flow at a 90º angle. Applications: Petrochemical and Refineries, Pharmaceutical and Biotechnology Industry, Food and...
PUMP SUPPORT FOR MOUNTING PULLEY

€76.00 (tax excl.)
€91.96 (tax included)
A pulley-mounted pump bracket mounts directly onto hydraulic gear pumps. Technical sheet: Possibility of choosing different shafts. The output shaft is cylindrical. There is the possibility of a 1:8 tapered shaft. The...
AXIS ANGULAR RETURN 25

€445.05 (tax excl.)
€538.51 (tax included)
25 axis angular transmission Possibility in 2 and 3 ways Ratio 1:1 or 2:1 (to be specified) The gearboxes have been designed for an input speed (axis A) of 1400 rpmEsta This speed, with the applicable power,...

Menu

Please sign in first.

Sign in