Click for more products.
No products were found.

SIMULTANEOUS VALVE AND

Simultaneity valve Y
It is a pneumatic component that allows the passage of a fluid (usually compressed air) to a common outlet only when there is flow in both inlets.
It consists of two inputs and one output.
Applications: machine tools, industrial automation, security systems.
Technical data sheet:
  • Thread-G1/8
  • nominal-2.5mm
  • Flow rate 6 bar with p 1 bar-100 Nl/min
  • Pressures-Minimum pressure: 2 bar
  • Maximum pressure: 10 bar (1 MPa)
  • Temperatures-Minimum temperature: -10 °C
  • Maximum temperature: +60 °C
  • Material-Aluminum body
  • Stainless steel spring
  • Board at NBR
  • Internal walls in brass
  • Compatible fluids-Compressed air
Read moreShow less
€16.72 (tax incl.)
€13.82 (tax excl.)
SELECT THE THREAD
  • 1/8"
Reference:
15060004
Description

Simultaneity valve Y

Read moreShow less
Product Details
15060004
Comments (0)
8 other products in the same category:
€6.60 (tax excl.)
€7.99 (tax incl.)
Unidirectional. High precision regulators. Tube-tube regulation. Possibility of mounting several regulators in parallel. Acetal resin body. Metal parts in nickel-plated brass.
€4.50 (tax excl.)
€5.45 (tax incl.)
A brass gate valve is a shut-off valve used to allow or completely shut off the flow of fluid through a pipe. Being made of brass, it is suitable for medium and low pressure applications. Applications: Domestic...
€28.00 (tax excl.)
€33.88 (tax incl.)
Unidirectional flow regulator. Available in 1/8" - 1/4" threads Working temperature -10ºC / 60 ºC Pressure 2 - 10 bar The panel mounting with the special nut, the knob knob, when turned, does not move relative to the...
€51.00 (tax excl.)
€61.71 (tax incl.)
A stainless steel one-way flow regulator is designed to control and adjust airflow in pneumatic circuits. It allows flow to be regulated in one direction while maintaining free or less restricted flow in the opposite...
€1.68 (tax excl.)
€2.03 (tax incl.)
Manual purge. It is used to remove air, condensate or non-condensable gases from a system periodically and manually. It is essential in a wide variety of systems, from heating and cooling installations to industrial...
€185.71 (tax excl.)
€224.70 (tax incl.)
The wafer-type manual one-way knife gate valve, also known as a gate or sluice gate, is suitable for liquids containing a maximum of 5% suspended solids. If used for gravity discharge of dry solids, it is recommended...
€180.00 (tax excl.)
€217.80 (tax incl.)
The stainless steel safety valve, set at 5 bar, automatically releases system pressure when it exceeds 5 bar. Applications: Hydraulic systems, pneumatic systems, boilers and industrial equipment. Technical...
€78.17 (tax excl.)
€94.59 (tax incl.)
The ANSI 150 ISO-5211 flanged stainless steel ball valve is used to control fluid flow by means of a perforated sphere that rotates to open or close the passage of the fluid. Applications: Chemical and petrochemical...
Recently Viewed
€16.72 (tax incl.)
€13.82 (tax excl.)
Simultaneity valve Y It is a pneumatic component that allows the passage of a fluid (usually compressed air) to a common outlet only when there is flow in both inlets. It consists of two inputs and one output....
€3.40 (tax excl.)
€4.11 (tax incl.)
Identification ring It is used to be placed on an electrical socket or connector and to identify it visually. Its function is to organize and label sockets in complex electrical systems, such as control panels,...
€6.61 (tax excl.)
€8.00 (tax incl.)
Profile H It is an H-shaped profile made of SBR rubber, a very versatile and resistant type of synthetic rubber. It is ideal for the automotive sector and industry in general. Also for joining glass with 3 to 5 mm...
€0.44 (tax excl.)
€0.53 (tax incl.)
A fitting plug is a pneumatic accessory designed to securely close and seal the outlet of a fitting or pneumatic line that uses a quick-connect fitting. Main features: Working pressure -0.99 / 10 bar. Temperature 0 /-...
€20.00 (tax excl.)
€24.20 (tax incl.)
An in-line suction filter housing is used to install a filter in the line to suction oil from a hydraulic system. The filter is placed inside the housing and secured with a filter element. Applications: industrial...
€9.93 (tax excl.)
€12.02 (tax incl.)
A tank support bracket firmly and stably holds and secures a compressed air tank. These brackets are essential in any installation using compressed air. They allow the tank to be fixed to the floor or wall. Technical...

Menu

Settings