Click for more products.
No produts were found.
Click for more products.
No produts were found.

HYDRAULIC NC LIMIT SWITCH

HYDRAULIC NC LIMIT SWITCH.

  • Normally Closed Position
  • Maximum working pressure 350 bar.
  • Flow rate 3/8" 50 l/min
  • Flow rate 1/2" 70 l/min
  • Flow rate 3/4" 100 l/min
  • Manufactured from zinc-plated steel, with internal components made of heat-hardened and ground steel. NBR gaskets.
  • Maximum pivot stroke 13 mm.
€65.34 (tax included)
€54.00 (tax excl.)
SELECT THE THREAD
  • 3/8"
  • 1/2"
  • 3/4"
Reference:
491350
Description

HYDRAULIC LIMIT SWITCH.

Product Details
491350
Comments
Related products
€0.21 (tax excl.)
€0.25 (tax included)
metal gasket The Metal Buna gasket is a sealing element composed of an outer metal ring and an inner elastomer (NBR) ring. It is used to achieve a watertight seal in threaded and flanged joints. The main function of...
€0.55 (tax excl.)
€0.67 (tax included)
Male-to-male splice fitting A male-to-male coupling is used in hydraulic systems to directly join two male pipes or hoses, allowing the flow of hydraulic fluid between them. The male threads are screwed into the...
12 other products in the same category:
€19.00 (tax excl.)
€22.99 (tax included)
Double pilot check valve for Ø12 tube Made of steel. Conical seat. Working pressure, between 300 and 350 bar. Max temperature 80ºC
€21.00 (tax excl.)
€25.41 (tax included)
Flow regulator with BIDIRECTIONAL straight knob control allows regulation in both directions. Possibility of attaching a nut for paneling. Regulated scale. Maximum pressure 300 bar. Flow rate, from 60 to 300 l/min.
€30.00 (tax excl.)
€36.30 (tax included)
1-button joystick-type handle to control 1 coil. 2-wire cable A single push button. M-10x150 threaded fixing.
€33.00 (tax excl.)
€39.93 (tax included)
A piston-type switching hydraulic pressure switch is used in hydraulic systems to control fluid flow based on pressure. It operates by means of an internal piston that moves in response to hydraulic fluid pressure....
€23.80 (tax excl.)
€28.80 (tax included)
A one-way knob flow regulator is a valve designed to control the speed of an actuator by allowing free flow of fluid in one direction and restricting it in the opposite direction. Applications: Automation, robotics,...
€2.80 (tax excl.)
€3.39 (tax included)
Anti-burst parachute valve fitting. An anti-burst parachute valve is a hydraulic safety component used primarily in industrial machinery, elevators, and construction projects to prevent the uncontrolled descent or...
€140.00 (tax excl.)
€169.40 (tax included)
The Wika A-10 pressure transmitter is a pressure sensor designed for general industrial applications requiring accurate, reliable, and continuous measurement. Applications: hydraulic systems, pneumatic systems, pumps,...
€30.00 (tax excl.)
€36.30 (tax included)
1-button joystick-type handle to control 1 coil. 2-wire cable A single push button. M-10x150 threaded fixing.
€2.40 (tax excl.)
€2.90 (tax included)
The lever for a monobloc distributor is the mechanical control element that allows the operator to control the movement of the internal slide of a hydraulic valve. Applications: agricultural machinery, cranes and...
€85.00 (tax excl.)
€102.85 (tax included)
2-WAY HYDRAULIC SOLENOID VALVE, NORMALLY CLOSED, DOUBLE CHECK Maximum pressure 280 bar. Flow rate 3/8" 30 l/min Flow rate 1/2" 70 l/min Operating temperature -20/90ºC Aluminum body, NBR gaskets Alternating current...
€38.40 (tax excl.)
€46.46 (tax included)
Compensated 2-way flow regulator. Two chokes in series are present in the valve. The first corresponds to the one that is adjustable using the knob; The second, controlled by the pressure prior to and following the...
€16.49 (tax excl.)
€19.95 (tax included)
Bidirectional pineapple bidirectional regulator . To regulate the speed of hydraulic cylinders. Made of steel. Fixing locknut. Temperature -20ºC / 80ºC Flow rates from 15 to 80 liters per minute. Maximum pressure 350...
Recently Viewed
€65.34 (tax included)
€54.00 (tax excl.)
HYDRAULIC NC LIMIT SWITCH. Normally Closed Position Maximum working pressure 350 bar. Flow rate 3/8" 50 l/min Flow rate 1/2" 70 l/min Flow rate 3/4" 100 l/min Manufactured from zinc-plated steel, with internal...

Menu