Click for more products.
No produts were found.
Click for more products.
No produts were found.

2-WAY HYDRAULIC SOLENOID VALVE COIL

A solenoid valve coil is used to actuate directional valves in pneumatic and hydraulic systems.

Applications: Automation machinery, Process control systems, HVAC and Refrigeration, Mobile equipment, Automated irrigation systems

Technical specifications:

  • Coil for hydraulic solenoid valve.
  • Inner diameter 13 mm.
  • DC power 22 W.
  • Maximum temperature 180ºC.
  • Class H insulation
  • Connector type DIN-4365A
  • 100% ED

€18.15 (tax included)
€15.00 (tax excl.)
VOLTAGE/VOLUME
  • 12V DC
  • 24V DC
  • 110 RAC
  • 220 RAC
Reference:
4931201
Description

solenoid valve coil C4

BOBINA ELECTROVALVULA C4

Product Details
4931201
Comments
12 other products in the same category:
€3.61 (tax excl.)
€4.37 (tax included)
The screw hydraulic flow regulator is a valve designed to precisely control and adjust the flow of oil in hydraulic circuits by means of an adjusting screw. Applications: Industrial hydraulic systems, Agricultural...
€23.80 (tax excl.)
€28.80 (tax included)
A one-way knob flow regulator is a valve designed to control the speed of an actuator by allowing free flow of fluid in one direction and restricting it in the opposite direction. Applications: Automation, robotics,...
€65.00 (tax excl.)
€78.65 (tax included)
The manual 6-way hydraulic diverter valve is a control component in a hydraulic system that allows the operator to manually redirect the flow of a hydraulic fluid (usually oil) from one line to another or to a...
€28.70 (tax excl.)
€34.73 (tax included)
Single pilot check valve. It is used in hydraulic systems to allow fluid flow in one direction and prevent backflow. An auxiliary pressure valve controls the opening and closing of the main valve. Technical sheet:...
€14.67 (tax excl.)
€17.75 (tax included)
The selector valve is designed to automatically select the line with the highest pressure between two hydraulic inlets, blocking the other to prevent fluid backflow. Applications: industrial machinery, mobile...
€30.00 (tax excl.)
€36.30 (tax included)
1-button joystick-type handle to control 1 coil. 2-wire cable A single push button. M-10x150 threaded fixing.
€155.00 (tax excl.)
€187.55 (tax included)
A 6-way diverter solenoid valve is a valve that controls the flow of a fluid in six different directions. It is used to divert fluid from one line to another, or to combine fluid from two or more lines. 6-way diverter...
€37.95 (tax excl.)
€45.92 (tax included)
Pressure limiting valve An in-line pressure limiting valve is a safety component that is installed directly on the piping of a hydraulic system to limit the maximum allowable pressure in the circuit. When the fluid...
€96.56 (tax excl.)
€116.84 (tax included)
Monobloc distributor with spring return to center lever. Double effect. Includes limiting valve. The position of the lever can be vertical or horizontal. Availability of 1 to 8 positions with lever, depending on...
€2.80 (tax excl.)
€3.39 (tax included)
Anti-burst parachute valve fitting. An anti-burst parachute valve is a hydraulic safety component used primarily in industrial machinery, elevators, and construction projects to prevent the uncontrolled descent or...
€11.41 (tax excl.)
€13.81 (tax included)
The high-pressure hydraulic check valve is used in hydraulic systems to allow fluid to flow in one direction and prevent it from flowing in the opposite direction. Technical sheet: Check valve that allows flow in one...
€48.00 (tax excl.)
€58.08 (tax included)
A 2-way INOX hydraulic ball valve is a device that controls the flow of a fluid (oil or water) in hydraulic systems in two directions. Applications: hydraulic cylinders, hydraulic motors, hydraulic control circuits,...
Recently Viewed
€18.15 (tax included)
€15.00 (tax excl.)
A solenoid valve coil is used to actuate directional valves in pneumatic and hydraulic systems. Applications: Automation machinery, Process control systems, HVAC and Refrigeration, Mobile equipment, Automated...

Menu