Click for more products.
No products were found.

LINK BARCELONA FEMALE

The female Barcelona coupling is characterized by being a symmetrical fitting, meaning that any Barcelona fitting can be mated with another of the same size. It consists of a cylindrical body with three pins that engage with a quarter-turn.

Its main use is in fire protection systems.

Technical sheet:

  • Ideal for use with water.
  • Under fire regulations UNE-23400
  • Made of aluminum or brass.
  • Supplied with gasket.
Read moreShow less
€9.63 (tax incl.)
€7.96 (tax excl.)
SELECT THE THREAD
  • 3/4"
  • 1"
  • 1-1/2"
  • 2-1/2"
  • 4"
SIZE
  • 25
MATERIAL
  • ALUMINUM
Reference:
71511
Description

Barcelona female link

Read moreShow less
Product Details
71511
Comments (0)
8 other products in the same category:
€10.00 (tax excl.)
€12.10 (tax incl.)
Lance for use in equipped fire hydrants and general cleaning and irrigation uses. Triple effect launcher; adjustable jet, cone or straight jet. Effective range 25 mt (jet at 7 bar) Size 25 Made of ABS 1" female...
€24.41 (tax excl.)
€29.54 (tax incl.)
Barcelona traffic jam A Barcelona connection plug is a closing or sealing element used to temporarily or permanently close a conduit, pipe, or thread. Applications: plumbing, heating, gas and water systems, preventing...
€6.36 (tax excl.)
€7.70 (tax incl.)
Barcelona male link The male Barcelona coupling is used to join hoses or pipes to equipment or networks that have a female thread, using the Barcelona type coupling system, which is very common in water and...
€16.55 (tax excl.)
€20.03 (tax incl.)
Barcelona hose link The Barcelona hose connector is used to attach a flexible hose to another hose or to equipment that has a Barcelona-type coupling, very common in water conveyance systems. Main features: Ideal for...
€25.63 (tax excl.)
€31.01 (tax incl.)
Barcelona link reduction A Barcelona-type reducer is used to join two Barcelona-type links of different diameters, allowing hoses or pipes of different sizes to be adapted within the same installation. Main features:...
€400.00 (tax excl.)
€484.00 (tax incl.)
An equipped fire hydrant (EFH) is a first-response fire extinguishing system designed to be used by building occupants in the initial stages of a fire. It is a fundamental element of fire protection in buildings and...
€0.50 (tax excl.)
€0.61 (tax incl.)
Teflon tape is a type of adhesive tape made from a synthetic polymer that is resistant to temperature, corrosion, and abrasion. Teflon is a non-conductive material, making it ideal for electrical applications. Teflon...
€0.60 (tax excl.)
€0.73 (tax incl.)
Barcelona Liaison Board A Barcelona coupling is a sealing element used in hydraulic and pneumatic Barcelona coupling connections. Its main function is to ensure a watertight seal, preventing leaks of water or other...
Recently Viewed
€9.63 (tax incl.)
€7.96 (tax excl.)
The female Barcelona coupling is characterized by being a symmetrical fitting, meaning that any Barcelona fitting can be mated with another of the same size. It consists of a cylindrical body with three pins that...
€0.74 (tax excl.)
€0.90 (tax incl.)
A short stainless steel muffler is used in compressed air systems to reduce the noise level produced when pressurized air is discharged into the atmosphere. Applications: Industrial automation, Food and pharmaceutical...
€1.00 (tax excl.)
€1.21 (tax incl.)
A DIN-43650-A T-30 coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and a coil of an electromechanical device. The T-30...
€78.17 (tax excl.)
€94.59 (tax incl.)
The ANSI 150 ISO-5211 flanged stainless steel ball valve is used to control fluid flow by means of a perforated sphere that rotates to open or close the passage of the fluid. Applications: Chemical and petrochemical...
€10.81 (tax excl.)
€13.08 (tax incl.)
DIN-2353 S SWIVEL FEMALE UNION Operating temperature -20ºC / 120ºC. Made of drawn steel DIN3859-1. Bichromated coating ISO 4042. Corrosion resistance. Work pressures 6-8-10-12-14 600 bar. 16-20-25-30 400 bar . 38,315...
€3.58 (tax excl.)
€4.33 (tax incl.)
A DIN 2353 L weldable bicone is used in hydraulic piping systems that comply with DIN 2353, specifically the L (lightweight) series, and is designed to be welded to a pipe. Applications: hydraulic systems, medium...

Menu

Settings