Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
6-GROOVE TAPER SPA TRAPEZOIDAL PULLEY
6-GROOVE TAPER SPA TRAPEZOIDAL PULLEY
6-GROOVE TAPER SPA TRAPEZOIDAL PULLEY
6-GROOVE TAPER SPA TRAPEZOIDAL PULLEY

6-GROOVE TAPER SPA TRAPEZOIDAL PULLEY

SPA 6-groove trapezoidal pulley taper.

A 6-groove taper SPA trapezoidal pulley is a component for transmitting a large amount of power using six SPA profile trapezoidal belts.

By using six belts, this pulley can transmit a much greater amount of power than pulleys with fewer grooves. The load is distributed among the six belts, reducing wear on each one and increasing the system's lifespan.

Common applications: Heavy industry, Power generation, Construction equipment.

Technical specifications:

  • Manufactured according to DIN 7753/1 in cast iron. High hardness.
  • Balanced.
  • For assembly with a taper.
  • Size selection based on the original diameter PD.

IF YOU CAN'T FIND THE MODEL YOU NEED, CONTACT US.

€14.62 (tax included)
€12.08 (tax excl.)
STRAP MEASUREMENT
Reference:
529000
Description

SPA 6-groove trapezoidal pulley taper.

Product Details
529000
Comments
12 other products in the same category:
XPA TIMING BELT

€7.26 (tax excl.)
€8.78 (tax included)
XPA timing belt The XPA profile is narrower than other toothed V-belt profiles, making it ideal for small diameter pulleys. It is especially suitable for working where there are pulleys of extremely small diameters, a...
T5 POLYURETHANE TOOTHED FLAT BELT

€2.10 (tax excl.)
€2.54 (tax included)
T5 POLYURETHANE TOOTHED FLAT BELT Strap width 6, 10 or 16 mm (Other sizes available upon request) T5 flat belts are made of high-quality polyurethane with steel and aramid cables. Very good wear resistance, chemical...
SPC V-BELT

€34.84 (tax excl.)
€42.16 (tax included)
SPC V-belt It is characterized by having a narrower trapezoidal cross-section than other profiles. Typical applications: Low power transmissions, installations where space is limited, portable machines. Technical...
TRAPEZOIDAL BELT A

€3.61 (tax excl.)
€4.37 (tax included)
V-belt A The classic A-profile trapezoidal belt is used in various applications such as automotive, industrial, and construction. It is made of rubber. The sizes are defined by the width, pitch, and height of the...
TRAPEZOIDAL BELT B

€5.32 (tax excl.)
€6.44 (tax included)
V-belt B Applications: Agricultural machinery, Automotive industry, Industrial machinery or Transportation systems. Technical specifications: Manufactured according to ISO-4183, ISO-4184, and DIN-2215 Temperature...
SPB TRAPEZOIDAL BELT

€13.50 (tax excl.)
€16.34 (tax included)
SPB V-belt The classic trapezoidal belt has a narrow trapezoidal profile SPB 16x13. The SPB profile is characterized by being narrower and having a greater power transmission capacity per unit of width. Available in a...
Z-BELT

€3.61 (tax excl.)
€4.37 (tax included)
Z-belt The Z trapezoidal belt stands out for its high mechanical resistance and good working conditions at high and low temperatures. Suitable for all industrial sectors, especially: Agricultural machinery, Industrial...
CX TIMING BELT

€21.82 (tax excl.)
€26.40 (tax included)
CX timing belt The combination of the trapezoidal profile and the teeth ensures power transmission with minimal slip losses. The synchronization between the motor and driven shafts is very precise, making it ideal for...
POLEA TRAPEZOIDAL 3 RANURAS TAPER SPA

€32.61 (tax excl.)
€39.46 (tax included)
Polea trapezoidal 3 ranuras taper SPA Sirve para transmitir potencia utilizando tres correas trapezoidales de perfil SPA. Es fundamental en sistemas de transmisión en maquinaria industrial, agrícola y otros equipos....
TRAPEZOIDAL BELT C

€14.30 (tax excl.)
€17.30 (tax included)
C-belt They are used in a wide range of industrial applications: Agricultural machinery, Industrial machinery, Conveyors, Construction machinery. Technical specifications: Manufactured according to ISO-4183, ISO-4184,...
T10 POLYURETHANE TOOTHED FLAT BELT

€10.50 (tax excl.)
€12.71 (tax included)
T10 polyurethane toothed flat belt Main features: Strap width: 16, 25, 32 or 50 mm (See other sizes). It is made of high-quality polyurethane with steel and aramid cables. Very good wear resistance, chemical...
PERFORATED V-BELT

€13.28 (tax excl.)
€16.07 (tax included)
A perforated V-belt is a variation of the traditional V-belt, designed with holes or perforations along its length. These perforations allow for better dissipation of the heat generated by friction, extending the...
Recently Viewed
6-GROOVE TAPER SPA TRAPEZOIDAL PULLEY

€14.62 (tax included)
€12.08 (tax excl.)
SPA 6-groove trapezoidal pulley taper. A 6-groove taper SPA trapezoidal pulley is a component for transmitting a large amount of power using six SPA profile trapezoidal belts. By using six belts, this pulley can...
BATTERY-POWERED ELECTRO-HYDRAULIC PRESS

€1,700.00 (tax excl.)
€2,057.00 (tax included)
A battery-powered electro-hydraulic press uses a hydraulic system driven by an electric motor powered by a rechargeable battery to make joints, usually radial or axial, in pipes and fittings. Applications: Plumbing,...
HIGH TEMPERATURE GREASE LUB-KA03 LUBRICUS

€63.40 (tax excl.)
€76.71 (tax included)
High temperature grease LUB-KA03 LUBRICUS It is a grease cartridge designed for use in high-temperature automatic lubrication systems. Technical specifications: PHS high temperature grease cartridge, PAO base Pressure...
SENSOR SUPPORT ROD CYLINDER Ø32-Ø63

€6.40 (tax excl.)
€7.74 (tax included)
Rod cylinder sensor support Ø32-Ø63 It is used to securely attach a sensor to an ISO 6432 pneumatic cylinder with a rod diameter ranging from 32 to 63 mm. Ensures that the sensor remains in the correct position,...
SILENCER WITH ADJUSTMENT

€2.23 (tax excl.)
€2.70 (tax included)
A regulated silencer is used in compressed air systems to reduce the noise level generated by escaping air from valves, cylinders, or any other pneumatic equipment. It allows for controlling the exhaust air flow rate...
3-PIECE PRESS STAINLESS STEEL FITTING

€14.64 (tax excl.)
€17.71 (tax included)
A 3-piece stainless steel press fitting is used in piping systems that require high corrosion resistance and secure connections, especially in sanitary and industrial applications. It facilitates pipe assembly and...

Menu

Please sign in first.

Sign in