Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.

NG-10 SOLENOID VALVE

Filter By
NG-10 CROSS SOLENOID VALVE - H

NG-10 CROSS SOLENOID VALVE - H

€126.51 (tax incl.)
€104.55 (tax excl.)
CETOP-5 NG-10 crossed H solenoid valve Maximum pressure 315 bar. Flow rate 160 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac SUPPLIED WITH COIL Supplied with connector and 4 screws.
NG-10 PARALLEL CROSS SOLENOID VALVE

NG-10 PARALLEL CROSS SOLENOID VALVE

€126.51 (tax incl.)
€104.55 (tax excl.)
CETOP-5 NG-10 parallel crossed solenoid valve Maximum pressure 315 bar. Flow rate 160 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac SUPPLIED WITH COIL Supplied with connector and 4 screws.
CLOSED CROSS SOLENOID VALVE NG-10

CLOSED CROSS SOLENOID VALVE NG-10

€126.51 (tax incl.)
€104.55 (tax excl.)
CETOP-5 NG-10 closed crossed solenoid valve Maximum pressure 315 bar. Flow rate 160 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac SUPPLIED WITH COIL Supplied with connector and 4 screws.
NG10 SOLENOID VALVE COIL

NG10 SOLENOID VALVE COIL

€42.31 (tax incl.)
€34.97 (tax excl.)
Coil for NG6 CETOP 5 solenoid valve Protection IP-65 DIN-43650-A Connector Available voltages 12VDC, 24VDC, 24VAC, 110VAC, 220VAC Consult other voltages.
SOLENOID VALVE NG-10 4/3 CENTER A-B-T

SOLENOID VALVE NG-10 4/3 CENTER A-B-T

€165.76 (tax incl.)
€136.99 (tax excl.)
CETOP-5 NG-10 Solenoid Valve ABT Center Maximum pressure 315 bar. Flow rate 160 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac SUPPLIED WITH COILS Supplied with connector and 4 screws.
SOLENOID VALVE NG-10 4/3 CENTER P-T

SOLENOID VALVE NG-10 4/3 CENTER P-T

€176.22 (tax incl.)
€145.64 (tax excl.)
CETOP-5 NG-10 center PT solenoid valve Maximum pressure 315 bar. Flow rate 160 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac. SUPPLIED WITH COILS Supplied with connector and 4 screws.
SOLENOID VALVE NG-10 4/3 CENTER H

SOLENOID VALVE NG-10 4/3 CENTER H

€165.76 (tax incl.)
€136.99 (tax excl.)
CETOP-5 NG-10 center H solenoid valve Maximum pressure 315 bar. Flow rate 160 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac SUPPLIED WITH COILS Supplied with connector and 4 screws.
SOLENOID VALVE NG-10 4/3 CLOSED CENTER

SOLENOID VALVE NG-10 4/3 CLOSED CENTER

€165.76 (tax incl.)
€136.99 (tax excl.)
CETOP-5 NG-10 closed center solenoid valve Maximum pressure 315 bar. Flow rate 160 l/min. Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac. Supplied with coil Supplied with connector and 4 screws.
SIDE NG-10 BASE PLATE

SIDE NG-10 BASE PLATE

€66.59 (tax incl.)
€55.03 (tax excl.)
CETOP-5 NG-10 side exit single base plate. Side thread outlets 1/2" - 3/4" Made of aluminum.
LOWER NG-10 BASE PLATE

LOWER NG-10 BASE PLATE

€67.76 (tax incl.)
€56.00 (tax excl.)
CETOP-5 NG-10 single base bottom outlet. Bottom outlet 1/2" (3/4") Made of Aluminum
BLIND PLATE NG-10

BLIND PLATE NG-10

€59.30 (tax incl.)
€49.01 (tax excl.)
Blanking plate for NG-10 Made of F-114 steel Supplied with 4 O-rings.
DIN-43650-A LED T-30 CONNECTOR

DIN-43650-A LED T-30 CONNECTOR

DIN-43650-A connector with LED Contacts: Nut with protection for conductors. LED + Varistor Circuit Number of poles: 2 + Earth. Contact distance: 11 mm. Cable entry: PG7 – PG9. Lining: NBR profile (Different, upon...
Showing 1-12 of 12 item(s)

The dimensions of the solenoid valves and the modules are according to ISO-4401, DIN-24340 and CETOP RP121H standards, which allows for perfect interchangeability with the majority of oil-hydraulic manufacturers on the market. The main characteristics by size are: following:In CETOP-3 or NG6 models 315 bars and a flow rate of 80 liters/minute.In CETOP-5 or NG10 models 315 bars and a flow rate of 100 liters/minute.In CETOP-7 or NG16 models 350 bars and a flow rate of 200 liters/minute. In the CETOP-8 or NG25 models 350 bars and a flow rate of 350 liters/minute. And in the CETOP -10 or NG32 models 350 bars and a flow rate of 700 liters/minute. We have a large assortment of base plates and top covers (NG-6, NG-10, NG16, NG-25 and NG32) to attach the elements separately and independiente.Tambi . We also have a catalog of proportional hydraulics for drives in the which requires a progression or recession of movement. Symbols according to ISO-1219 standard 713205 - NG6 SOLENOID VALVE BLOCK 5 ELEMENTS

Read more

Menu

Please sign in first.

Sign in