Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
WELD TEE SCH-10 A-304L

WELD TEE SCH-10 A-304L

A SCH-10 A-304L welded tee is a pipe fitting used to divide fluid flow into three directions. It is connected by welding and is made of AISI 304L stainless steel with a wall thickness that meets the SCH-10 standard.

Applications: Food and Beverage Industry, Pharmaceutical and Biotechnology Industry, Chemical Plants, Drinking Water and Water Treatment Systems, HVAC Systems and Industrial Refrigeration.

Technical sheet:

  • With welding.
  • ASTM-A403 Quality
  • Dimensions according to ANSI/ASME B16.9-2007
  • Fluid pipelines, boilers, condensers, heat exchangers, reactors, etc.
  • For the chemical, pharmaceutical, natural gas, food, corrosive media and extreme temperature industries.
€4.43 (tax included)
€3.66 (tax excl.)
DIAMETERS
  • 3/4"
  • 1"
  • 1-1/4"
  • 1-1/2"
  • 2"
  • 2-1/2"
  • 4"
  • 5"
  • 6"
  • 8"
  • 10"
  • 1/2"
Reference:
66010025
Description

Weld you SCH-10 A-304L

Product Details
66010025
Comments
12 other products in the same category:
SANITARY BUTTERFLY VALVE CLAMP DIN

€180.00 (tax excl.)
€217.80 (tax included)
A DIN CLAMP sanitary butterfly valve is a type of quarter-turn valve designed specifically for sanitary applications that utilizes a CLAMP connection that meets the dimensional standards of DIN 32676. Applications:...
SANITARY BUTTERFLY VALVE CLAMP BS-4835

€180.00 (tax excl.)
€217.80 (tax included)
A CLAMP BS-4835 sanitary butterfly valve is used in most applications involving liquids and solids, and generally for non-obstructive liquids. The design facilitates installation and maintenance, allowing the valve to...
ISO-6431-15552 STAINLESS STEEL CYLINDER

€270.54 (tax excl.)
€327.35 (tax included)
Cylinder ISO-15552, ISO-6431, nfe-490031 Prepared for magnetic detection. Cylinder liner and cylinder head made of INOX-304 Stem and screws made of INOX-316 Operating pressure 10 bar. Operating temperature -20ºC /...
90º SCH-40 A-316L ELBOW

€3.58 (tax excl.)
€4.33 (tax included)
A 90º SCH-40 A-316L elbow is an industrial pipe fitting, designed to change the direction of fluid flow at a 90º angle. Applications: Petrochemical and Refineries, Pharmaceutical and Biotechnology Industry, Food and...
CONCENTRIC REDUCTION SCH-10 A-304L

€2.82 (tax excl.)
€3.41 (tax included)
Concentric reducer for welding SCH-10 A-304L Concentric reducer weld SCH-10 A-304L is a pipe fitting used to connect two pipes of different diameters while maintaining the same central axis, allowing a uniform flow...
CAP SCH-40 A-316L

€3.10 (tax excl.)
€3.75 (tax included)
A SCH-40 A-316L CAP is a pipe fitting used to close or plug the end of a pipe that meets the Schedule 40 (SCH 40) wall thickness standard and is made of stainless steel. It is suitable for demanding applications in...
90º SCH-10 A-304L ELBOW

€2.50 (tax excl.)
€3.03 (tax included)
A SCH-10 A-304L 90º elbow is an industrial pipe fitting designed to change the direction of fluid flow at a 90º angle. Applications: Food and beverage industry, Pharmaceutical industry, Chemical and petrochemical...
CONCENTRIC REDUCTION SCH40 A316L

€3.91 (tax excl.)
€4.73 (tax included)
Concentric reducer SCH40 A316L An SCH40 A316L concentric reducer is a pipe fitting designed to join two pipes of different diameters while maintaining a centered transition aligned with the axis. It is installed by...
TE SCH-40 A-316L

€5.29 (tax excl.)
€6.40 (tax included)
SCH-40 A-316L Tee is a "T" shaped pipe fitting made of 316L stainless steel and meets the Schedule 40 (SCH-40) wall thickness standard. Applications: chemical, pharmaceutical, natural gas, food, corrosive media and...
FOOD GRADE STAINLESS STEEL TUBE DIN-11851-2

€65.00 (tax excl.)
€78.65 (tax included)
Food grade stainless steel tube DIN-11851-2 It guarantees the chemical composition and mechanical properties of sanitary pipes. Quality Inspection : PMI to verify material grade. Dimension control. 100% visual and...
CAP SCH-10 A-304L

€2.24 (tax excl.)
€2.71 (tax included)
The SCH-10 Stainless Steel Solder Cap is used to hermetically close the end of a stainless steel pipe. It is dome-shaped and is placed over the end of the pipe to prevent possible leaks. It is used in the chemical,...
STUB END SCH-10 A-304L

€13.22 (tax excl.)
€16.00 (tax included)
A SCH-10 A-304L Stub end is a short length pipe end with a flange designed to be welded to a pipe. Applications: Food and beverage industry, Pharmaceutical industry, Water treatment, Compressed air and inert gas...
Recently Viewed
WELD TEE SCH-10 A-304L

€4.43 (tax included)
€3.66 (tax excl.)
A SCH-10 A-304L welded tee is a pipe fitting used to divide fluid flow into three directions. It is connected by welding and is made of AISI 304L stainless steel with a wall thickness that meets the SCH-10 standard....
TE SCH-40 A-316L

€5.29 (tax excl.)
€6.40 (tax included)
SCH-40 A-316L Tee is a "T" shaped pipe fitting made of 316L stainless steel and meets the Schedule 40 (SCH-40) wall thickness standard. Applications: chemical, pharmaceutical, natural gas, food, corrosive media and...
HAMMER NUT

€0.50 (tax excl.)
€0.60 (tax included)
The hammer nut is used to join pieces in grooves of aluminum profiles. It is characterized by its design with a U-shaped bridge that fits into the profile groove and by its slotted head that allows it to be fastened...
BRASS EXTENSION

€2.00 (tax excl.)
€2.42 (tax included)
A brass extension is a plumbing fitting used to join two sections of pipe together and increase their length. It's a short brass tube with threads on both ends, allowing it to be connected to other parts of the...
LATEX CORD

€2.44 (tax excl.)
€2.95 (tax included)
Latex cord is characterized by its high flexibility and stretchability. Despite its elasticity, it can be resistant to wear and abrasion, depending on its quality and thickness. Technical sheet: Latex is a natural...
3/4" IMPACT WRENCH AR-2018

€316.97 (tax excl.)
€383.53 (tax included)
An AR-2018 3/4" impact wrench is a compact and heavy-duty pneumatic tool designed to loosen and tighten medium-sized nuts and bolts with ease. Technical sheet: Square Drive Size: 3/4" (19 mm) Maximum torque: 1084 Nm...

Menu

Please sign in first.

Sign in