Click for more products.
No products were found.

1" SAFETY VALVE SET

A 1" calibrated safety valve automatically releases the pressure of a system when it exceeds a preset value (the calibration). Its main function is to prevent the system from being damaged by overpressure.

Applications: Steam systems, Hydraulic systems, Pneumatic systems and Chemical industry.

Technical data sheet:

  • Safety valve calibrated and sealed with a safety seal according to European regulation PED 9723/23/CE that regulates pressure components.
  • Supplied with corresponding CE certificate.
  • Manual safety ring.
  • Default settings 8 - 10 - 12 - 15 bar.
  • Available threads 1/8 - 1/4 - 3/8 - 1/2 - 3/4 - 1"
  • Nominal evacuation diameters 6 - 10 - 15mm.
Read moreShow less
€71.87 (tax incl.)
€59.40 (tax excl.)
PRESSURE
  • 8 Bar
  • 10 Bar
  • 12 Bar
  • 15 Bar
Reference:
43130007
Description

1" calibrated safety valve

Read moreShow less
Product Details
43130007
Comments (0)
8 other products in the same category:
€6.71 (tax excl.)
€8.12 (tax incl.)
The 1/4" adjustable 0.5-5 bar safety valve without set point automatically releases system pressure when it exceeds a preset value, adjustable between 0.5 and 5 bar. Its function is to prevent system damage due to...
€23.10 (tax excl.)
€27.95 (tax incl.)
The direct-action, flat-seat, spring- loaded safety valve is a device that relieves pressure in a system when it reaches a preset level. When the system pressure exceeds the valve's set pressure, the ball lifts off...
€180.00 (tax excl.)
€217.80 (tax incl.)
The stainless steel safety valve, set at 5 bar, automatically releases system pressure when it exceeds 5 bar. Applications: Hydraulic systems, pneumatic systems, boilers and industrial equipment. Technical...
€49.50 (tax excl.)
€59.90 (tax incl.)
A 3/4" calibrated safety valve is used to automatically release the pressure of a system when it exceeds a preset value (the calibration). Its function is to prevent the system from being damaged by overpressure....
€5.50 (tax excl.)
€6.66 (tax incl.)
Safety valve without tare 1/8" adjustable 0.5-5 bar Automatically releases excess pressure in a system when the valve exceeds a preset value. Once the pressure drops below the set value, the valve closes...
€17.60 (tax excl.)
€21.30 (tax incl.)
A 1/2" calibrated safety valve is used to automatically release the pressure of a system when it exceeds a preset value (the calibration). Its function is to prevent the system from being damaged by overpressure....
€6.30 (tax excl.)
€7.62 (tax incl.)
A 6-bar safety valve for water automatically releases excessive pressure in a water-handling system, preventing damage to equipment, pipes, or vessels. Its function is a pressure relief mechanism that activates when...
€8.37 (tax excl.)
€10.13 (tax incl.)
A 1/8" calibrated safety valve automatically releases pressure from a system when it exceeds a preset value (the calibration). Its function is to prevent damage to the system due to overpressure. Applications:...
Recently Viewed
€71.87 (tax incl.)
€59.40 (tax excl.)
A 1" calibrated safety valve automatically releases the pressure of a system when it exceeds a preset value (the calibration). Its main function is to prevent the system from being damaged by overpressure....
€7.20 (tax excl.)
€8.71 (tax incl.)
A Ø40 vacuum gauge with a 1/8" center thread and ring is designed to measure pressure below atmospheric pressure. Its robust construction and easy installation make it an essential tool for any workshop or laboratory....
€3.79 (tax excl.)
€4.59 (tax incl.)
An instant fitting, pipe fitting, or elbow fitting is a connector primarily used in pneumatic or low-pressure fluid systems. The fitting is designed to join two pipes and pass through and be secured to a panel or...
€5.30 (tax excl.)
€6.41 (tax incl.)
The linear joint is an accessory designed to join and align aluminum profiles in longitudinal extensions, allowing the structural and aesthetic continuity of the assembly to be maintained. Applications: modular...
€44.00 (tax excl.)
€53.24 (tax incl.)
The electrical cartridge saturation indicator shows when a filter cartridge is saturated and needs to be replaced. It's an electrical indicator, meaning it monitors the electrical conductivity of the oil passing...

Menu

Settings