Click for more products.
No produts were found.
Click for more products.
No produts were found.

PROGRESSIVE START VALVE

A soft-start valve protects pneumatic components from impacts and damage caused by a sudden and abrupt increase in pressure.

Applications: assembly and packaging machinery, automated production lines, robotics, large cylinder systems.

Technical sheet:

  • Gradually pressurize the installation until the working pressure is reached.
  • Before reaching the maximum available pressure, air is slowly forced into the lower circuit until it reaches almost 60% of the pressure at the top.
  • To set the pressurization time, use the built-in flow regulator.
  • It can be fixed to the wall using the provided holes or with modules.
  • Minimum pressure 3 bar.
  • Maximum inlet pressure 10 bar.
  • Flow rate at 6.3 bar 1570 l/min.
€149.99 (tax included)
€123.96 (tax excl.)
SELECT THE THREAD
  • 1/4"
  • 3/8"
  • 1/2"
  • 3/4"
Reference:
32050008
Description

soft start valve

Product Details
32050008
Comments
Related products
€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
€5.60 (tax excl.)
€6.78 (tax included)
The T22 coil is installed in 1/4" and 1/2" solenoid valves. It is a fundamental component in the operation of a solenoid valve. It is responsible for transforming electrical energy into magnetic energy, generating a...
1 other product in the same category:
€5.60 (tax excl.)
€6.78 (tax included)
The T22 coil is installed in 1/4" and 1/2" solenoid valves. It is a fundamental component in the operation of a solenoid valve. It is responsible for transforming electrical energy into magnetic energy, generating a...
Recently Viewed
€149.99 (tax included)
€123.96 (tax excl.)
A soft-start valve protects pneumatic components from impacts and damage caused by a sudden and abrupt increase in pressure. Applications: assembly and packaging machinery, automated production lines, robotics, large...
€81.90 (tax excl.)
€99.10 (tax included)
Ball vibrators S develop frequencies above 580 Hz (> 35,000 rpm ) and are used when powdery materials must be moved. Ball vibrators are installed on silos and hoppers to prevent the formation of bridges and rat holes...
€4.38 (tax excl.)
€5.30 (tax included)
Filter Y It is a plumbing accessory designed to filter impurities present in a fluid, such as water. Its Y shape allows fluid to enter through two branches and exit through a third. Applications: Domestic...
€78.66 (tax excl.)
€95.18 (tax included)
A pneumatic and manual grease pump is used to apply grease to lubrication points on machinery and equipment. It is notable for its versatility, as it can be operated in two different ways. Technical specifications:...
€1.14 (tax excl.)
€1.38 (tax included)
A blanking plug S is a closing or blocking element designed to seal or close the opening of a port, orifice or end of a component temporarily or permanently. It is used in a wide variety of systems and components,...

Menu