Click for more products.
No produts were found.
Click for more products.
No produts were found.

HALLITE GUIDE BAND 506 10 x 2

Hallite 506 friction guide band for cylinder piston seals. It has the following features:

  • It incorporates micro-entrances in the surface to trap fluids and self-lubricate.
  • Made of polyester/fabric.
  • Maximum speed 5 mt/sec.
  • Maximum temperature 120ºC
  • Wide range of fluids for use; mineral oils, water-based emulsions, phosphate esters, etc.
  • Price per meter.

Buy online HALLITE GUIDE BAND 506 10 x 2 at the best price

€6.53 (tax incl.)
€5.40 (tax excl.)
Reference:
804801
Consult price for large quantities
Description

The anti-friction or wear band fulfills the function of guiding the piston and the rod of the hydraulic cylinder in its travel, as well as to resist the lateral loads that arise.

At the same time, any metal-to-metal contact is avoided, which can damage all exposed surfaces and ultimately cause damage to seals, leaks and deterioration in the main components of the system.

Piston seal for sealing

Product Details
804801
4 other products in the same category:
€53.36 (tax incl.)
€44.10 (tax excl.)
Complete piston seal with a steel body and NBR sealing lips reinforced with a spring. Hardness 90 Shore Speed: 0.5 m/s. Temperature -30ºC / 100ºC. IF YOU DO NOT FIND THE DESIRED MEASUREMENT, CONTACT US
€13.79 (tax incl.)
€11.40 (tax excl.)
Gasket formed by two pieces, a PTFE slip ring, and an NBR O-ring as a tightening element. High resistance to pressures. Little friction. Speed 5 m/s. Temperature -30ºC / 100ºC IF YOU DO NOT FIND THE DESIRED...
€11.62 (tax incl.)
€9.60 (tax excl.)
Piston seal composed of an NBR slip ring, two extrusion rings, and two guide rings. This joint is used as a double-acting joint. The guide rings incorporated in the gasket prevent the possibility of contact between...
€9.44 (tax incl.)
€7.80 (tax excl.)
Compact seal formed by an elastomer sealing element, reinforced with fabric, and two guide and anti-extrusion rings. Speed 0.5 m/s. Temperature -30ºC / 100ºC When selecting the thickness, it refers to the "L" housing...

Menu