Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
SAFELOCK 1/8" Grease Lock Safety Nozzle
SAFELOCK 1/8" Grease Lock Safety Nozzle
SAFELOCK 1/8" Grease Lock Safety Nozzle
SAFELOCK 1/8" Grease Lock Safety Nozzle
SAFELOCK 1/8" Grease Lock Safety Nozzle
SAFELOCK 1/8" Grease Lock Safety Nozzle

SAFELOCK 1/8" Grease Lock Safety Nozzle

Safety shut-off nozzle for grease fittings.

  • Four reinforced steel staples.
  • High-performance hydraulic shutter.
  • It incorporates a linear ball joint.
  • It allows disconnection at over 600 bar, without losses or drips.
  • H-1/8" Thread
€41.14 (tax included)
€34.00 (tax excl.)
Reference:
633518
Description

Product Details
633518
Comments
Related products
STRAIGHT GREASE FITTING H1 STRAIGHT GREASE FITTING H1

€35.57 (tax excl.)
€43.04 (tax included)
Straight grease fitting H1 Its function is to apply small amounts of grease to specific lubrication points on machinery and equipment. It is an essential component in preventative maintenance, as it ensures proper...
45° ANGLED GREASE FITTING H2 45° ANGLED GREASE FITTING H2

€78.62 (tax excl.)
€95.13 (tax included)
A 45° angled grease fitting H2 is installed on machines and equipment to allow the injection of lubricant under pressure at a lubrication point. The opening through which the grease is injected is oriented at a 45°...
90° ANGLED GREASE FITTING H3 90° ANGLED GREASE FITTING H3

€80.50 (tax excl.)
€97.41 (tax included)
A 90° angled grease fitting H3 is installed on machines and equipment to allow the injection of lubricant (grease) under pressure at a specific lubrication point. The H3 head ensures universal compatibility with...
12 other products in the same category:
45° ANGLED GREASE FITTING H2

€78.62 (tax excl.)
€95.13 (tax included)
A 45° angled grease fitting H2 is installed on machines and equipment to allow the injection of lubricant under pressure at a lubrication point. The opening through which the grease is injected is oriented at a 45°...
FLAT GREASE FITTING 16 M1

€84.24 (tax excl.)
€101.93 (tax included)
The 16 M1 flat grease fitting is a specific type of grease fitting used in industrial machinery to facilitate the lubrication of hard-to-reach points. It allows for the injection of grease under pressure to lubricate...
THREADED HIGH PRESSURE PIPE NON-RETURN VALVE

€4.50 (tax excl.)
€5.45 (tax included)
High pressure Lubricationfitting with threaded non-return valve. Instant fitting for high pressure. Suitable for water, oil and grease. Incorporates non-return valve Maximum pressure 150 bar Temperature -30 / 150 ºC...
1/8" 45º RIGID COUPLING WITH NOZZLE

€5.76 (tax excl.)
€6.97 (tax included)
A 1/8" 45° rigid coupling with a straight nozzle is used to facilitate lubrication of hard-to-reach grease points. It is used with a grease gun to inject grease into bearings, bushings, or any mechanism that requires...
140-PIECE LUBRICATOR CASE 16090

€73.20 (tax excl.)
€88.57 (tax included)
A 140-piece grease nipple case 16090 is a maintenance kit containing a wide variety of grease nipples, used for the lubrication of machinery and equipment. Applications: Automotive and heavy machinery workshops,...
REAR GREASE NOZZLE HEAD 16

€13.00 (tax excl.)
€15.73 (tax included)
The rear grease fitting nozzle head 16 is an accessory designed to facilitate the lubrication of machinery and equipment using grease guns. Industrial, agricultural and automotive applications. Main features: DIN 3404...
STRAIGHT GREASE NOZZLE 12731

€6.24 (tax excl.)
€7.55 (tax included)
A 12731 straight grease fitting nozzle is a small component that is installed on machines and equipment to allow the introduction of lubricant (grease) under pressure at a specific lubrication point. Applications:...
GREASE HOSE

€7.80 (tax excl.)
€9.44 (tax included)
Grease hose A grease hose is a high-strength flexible conductor designed to carry lubricating grease under pressure from a pump or grease gun to a lubrication point on machinery or mechanical equipment. Applications:...
OIL NOZZLE WITH VALVE 12642

€5.40 (tax excl.)
€6.53 (tax included)
A 12642 oil nozzle with valve is used to precisely control the flow of oil from a container without dripping. The nozzle incorporates a closing and opening mechanism (the valve) that allows for controlled oil flow....
HIGH PRESSURE TUBE NON-RETURN VALVE

€4.50 (tax excl.)
€5.45 (tax included)
High pressure Lubricationfitting with non-return valve and fitting into housing Instant fitting for high pressure. Suitable for water, oil and grease. Incorporates non-return valve Maximum pressure 150 bar Temperature...
DOUBLE BALL 90º 18083

€44.40 (tax excl.)
€53.72 (tax included)
Double 90º ball joint 18083 It allows an angular movement of 90º in two perpendicular axes that are connected by a sphere or bearing. It is used in applications where bending in two directions is required, but with a...
HIGH PRESSURE GREASE GUN 18104

€69.00 (tax excl.)
€83.49 (tax included)
High pressure grease gun 18104 It is suitable for applying high-pressure grease to lubrication points that are difficult to access manually or to components that require a large amount of grease. Control valve allows...
Recently Viewed
SAFELOCK 1/8" Grease Lock Safety Nozzle

€41.14 (tax included)
€34.00 (tax excl.)
Safety shut-off nozzle for grease fittings. Four reinforced steel staples. High-performance hydraulic shutter. It incorporates a linear ball joint. It allows disconnection at over 600 bar, without losses or drips....
POWER CABLE 44 PIN IP-65 1601C000014

€158.00 (tax excl.)
€191.18 (tax included)
44-pin IP-65 power cable for integrated multipolar Sub-D system Choice between 3 cable lengths: 3.5 or 10 meters. Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side,...
PIPE ELBOW WALL GATEWAY CONNECTION DIN 2353 L

€7.40 (tax excl.)
€8.95 (tax included)
DIN 2353 L elbow pipe fitting Operating temperature -20 / 120ºC. Made of drawn steel DIN3859-1. Bichromated coating ISO 4042. Corrosion resistance. Working pressures: Ø 6-8-10-12-15 250 bar Ø 18-22 160 Bar Ø 28-35-42...
MALE SPLICE FOR WELDING HEXAGON

€1.11 (tax excl.)
€1.34 (tax included)
The hexagon male solder joint is used for connect a pipe by welding to a system with a female thread, providing a fixed, strong and watertight joint. Applications: hydraulic machinery, chemical industry and...
HOSE FOR SUCTION AND DISCHARGE OF FOOD-GRADE LIQUIDS

€386.88 (tax excl.)
€468.12 (tax included)
Hose for suction and discharge of food-grade liquids The hose for suction and discharge of food liquids , also compatible with S-370, is widely used in the food industry for the transport of liquids such as milk,...
90° ANGLED GREASE FITTING H3

€80.50 (tax excl.)
€97.41 (tax included)
A 90° angled grease fitting H3 is installed on machines and equipment to allow the injection of lubricant (grease) under pressure at a specific lubrication point. The H3 head ensures universal compatibility with...

Menu

Please sign in first.

Sign in