Click for more products.
No products were found.

DOUBLE 90º BALL JOINT 18083

Double 90º ball joint 18083

It allows 90° angular movement on two perpendicular axes connected by a ball or bearing. It is used in applications requiring bending in two directions, but with a limited angle.

Applications: automotive, industrial, electronics, medical equipment.

Technical specifications:

  • Double 90° ball joint
  • Made of steel.
  • Yellow galvanized surface.
  • Working pressure 400 bar.
  • Swivel joint with bearing, to facilitate working with high pressure.
  • Gasket over ring.
  • Weight 0.19 Kg
  • 1/8" male 1/4" female threads.
Read moreShow less
€53.72 (tax incl.)
€44.40 (tax excl.)
Reference:
6361
Description

Double 90º ball joint 18083

Read moreShow less
Product Details
6361
Comments (0)
8 other products in the same category:
€13.88 (tax excl.)
€16.79 (tax incl.)
A Stauffer grease gun is a hand-operated lubricator designed for the controlled and progressive application of grease to lubrication points on machinery. It features a small reservoir with a threaded cap that is...
€84.24 (tax excl.)
€101.93 (tax incl.)
The 16 M1 flat grease fitting is a specific type of grease fitting used in industrial machinery to facilitate the lubrication of hard-to-reach points. It allows for the injection of grease under pressure to lubricate...
€5.40 (tax excl.)
€6.53 (tax incl.)
An oil nozzle with a valve, part number 12642, is used to precisely control the flow of oil from a container without dripping. The nozzle incorporates an opening and closing mechanism (the valve) that allows for...
€2.16 (tax excl.)
€2.61 (tax incl.)
A 12073 conical grease fitting nozzle is a grease gun accessory designed to securely and tightly connect the gun to a lubrication point (grease fitting) and allow grease injection. Applications: Agricultural...
€6.24 (tax excl.)
€7.55 (tax incl.)
A 12731 straight grease fitting nozzle is a small component that is installed on machines and equipment to allow the introduction of lubricant (grease) under pressure at a specific lubrication point. Applications:...
€5.76 (tax excl.)
€6.97 (tax incl.)
A rigid 1/8" 45° coupling with a straight nozzle facilitates lubrication of hard-to-reach grease points. It is used with a grease gun to inject grease into bearings, bushings, or any mechanism requiring lubrication....
€69.00 (tax excl.)
€83.49 (tax incl.)
High pressure grease gun 18104 It is suitable for applying high-pressure grease to lubrication points that are difficult to access manually or to components that require a large amount of grease. The control valve...
€39.00 (tax excl.)
€47.19 (tax incl.)
A K1 ball grease fitting is a lubrication point that facilitates the introduction of grease into bearings, bushings, and other mechanisms that require periodic lubrication. Applications: industrial machinery,...
Recently Viewed
€53.72 (tax incl.)
€44.40 (tax excl.)
Double 90º ball joint 18083 It allows 90° angular movement on two perpendicular axes connected by a ball or bearing. It is used in applications requiring bending in two directions, but with a limited angle....

Menu

Settings