HYDRAULIC BASE PLATES

BASE PLATES FOR HYDRAULIC SOLENOID VALVES. Buy online at the best price

The base plates are elements responsible for distributing the oil flow to all the elements that can be mounted on them and be able to fix them to them for all types of valves under the NG-6, NG-10 and NG-16 standard. All brands that meet these standards can be mounted and are completely interchangeable, using 4 threaded screws.

The oleo-hydraulic base plates, apart from distributing the oil from the hydraulic pump to its cylinders or peripherals, through the solenoid valves, are also prepared to be able to install a pressure gauge and display the circuit pressure, a pressure relief valve can also be connected. safety or limiting, to prevent excess pressure that the hydraulic pump can give. We can also install a bypass solenoid valve depending on which circuits we need it.

The base plates can be simple, with a single position to install various sandwich-type components, such as pressure regulating or reducing valves, pressure limiting valves, single or double non-return valves and the solenoid valve itself, always in the modular system. NG-6, NG-10. Or they can have several stations, up to 10. Where the same valves described can be placed.

They are made of steel or aluminum. There are several models depending on each application need.

The inlets and outlets of the fluid, normally oil, can be lateral or vertical.

Base plates are used in all types of industries where great forces are required.