Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
MALE PLUG CONICAL THREAD

MALE PLUG CONICAL THREAD

Male plug conical thread

Its function is to safely and hermetically join two components, usually tubes or fittings.

The tapered thread ensures a tight seal when tightened, as the threading progresses, the pressure increases and seals any gaps between the threads.

Common applications: Pneumatics, Hydraulics, Food industry, Chemical industry.

Technical data sheet:

  • Nickel-plated brass body.
  • Profile Standard 97/23 CE 3.3
  • Possibility of identifying sockets by means of coloured rings
  • Nominal pitch 8 mm.
  • Stainless steel spring and balls.
  • NBR-VITON gaskets
  • Serving temperature -15 / 125 ºC.
  • Working pressure 10 bar.
  • Flow rate 30 l/min.
€3.67 (tax included)
€3.03 (tax excl.)
SELECT THE THREAD
  • 1/8"
  • 1/4"
  • 3/8"
Reference:
19250005
Description

Male plug conical thread

Product Details
19250005
Comments
12 other products in the same category:
MINIATURE TUBE REDUCTION

€1.77 (tax excl.)
€2.14 (tax included)
Miniature tube reduction instant fitting Acetal resin body. Metal parts in nickel-plated brass. Ideal for micropneumatic assemblies. 40% reduction compared to a conventional fitting. Elliptical push button: Easy...
IDENTIFICATION RING

€3.40 (tax excl.)
€4.11 (tax included)
Identification ring It is used to be placed on an electrical socket or connector and to identify it visually. Its function is to organize and label sockets in complex electrical systems, such as control panels,...
MINIATURE THREADED PIPE ELBOW UNION

€2.01 (tax excl.)
€2.43 (tax included)
Miniature instant fitting elbow pipe thread Acetal resin body. Metal parts in nickel-plated brass. Ideal for micropneumatic assemblies. Reduced by 40% compared to a conventional fitting. Elliptical push button: Easy...
REDUCED UNION Ø3 TO Ø4

€2.12 (tax excl.)
€2.57 (tax included)
A Ø3 to Ø4 reducing union is a mechanical connector for joining two tubes or pipes of different diameters, specifically, one with an outer diameter of 3mm and another of 4mm. Applications: pneumatics, hydraulics,...
DOUBLE BANJO BALL FOR BRAKE PIPE

€9.90 (tax excl.)
€11.98 (tax included)
A double banjo ball brake line fitting is a fitting used in hydraulic brake systems, especially in the automotive sector. Its function is to connect two brake lines at a single point, allowing the flow of brake fluid...
EXTENDED MALE PLUG

€7.60 (tax excl.)
€9.20 (tax included)
Extended male plug It is used to join two components, usually tubes or fittings. It stands out for its greater length than a standard male plug. Applications: Pneumatics, Hydraulics, Food industry, Industrial...
SUPPLEMENT AND MINIATURE REDUCTION

€2.84 (tax excl.)
€3.44 (tax included)
A miniature Y-shaped fitting allows you to join sections of pipe or hose, or to connect equipment to a piping network. Its function is to ensure a tight and secure connection, allowing the flow of a fluid (water, gas,...
STRAIGHT BALL BANJO FOR BRAKE PIPE

€3.58 (tax excl.)
€4.33 (tax included)
A straight banjo fitting is a fitting used in hydraulic brake systems. Its function is to securely and flexibly connect the sections of tubing that make up the brake fluid circuit. Applications: Vehicle braking...
BANJO 90º BALL FOR BRAKE PIPE

€4.24 (tax excl.)
€5.13 (tax included)
A 90° banjo fitting for brake lines is a specific type of hydraulic fitting used in vehicle brake systems. Its function is to securely and leak-free connect a brake line or pipe to a brake system component at a 90°...
UNION ELBOW FOR BRAKE PIPE

€18.15 (tax excl.)
€21.96 (tax included)
A brake pipe elbow is a fundamental component in the hydraulic braking systems of vehicles. Its function is to connect two sections of brake pipe at a 90º angle, thus allowing the flow of brake fluid to be directed in...
1/8" STRAIGHT SWIVEL NUT FOR BRAKE TUBE

€6.16 (tax excl.)
€7.45 (tax included)
A 1/8" straight brake line swivel nut is used to connect a rigid brake line to another brake system component in a straight and secure manner. The nut, which is tightened to secure the connection, is free to rotate on...
MINI TE MALE SIDE MINIATURE

€3.47 (tax excl.)
€4.20 (tax included)
A miniature male side mini tee is a small connector for low-pressure fluid or pneumatic systems that requires a "T" shaped connection. It has a male side thread. Applications: Miniaturized pneumatic systems, Miniature...
Recently Viewed
MALE PLUG CONICAL THREAD

€3.67 (tax included)
€3.03 (tax excl.)
Male plug conical thread Its function is to safely and hermetically join two components, usually tubes or fittings. The tapered thread ensures a tight seal when tightened, as the threading progresses, the pressure...
FIG. 92 ELBOW 90 GALVANIZED MALE FEMALE

€1.15 (tax excl.)
€1.39 (tax included)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...
SOLENOID VALVE NG-10 4/3 CENTER A-B-T

€136.99 (tax excl.)
€165.76 (tax included)
The NG-10 4/3 ABT Center Solenoid Valve is a hydraulic component that controls fluids in medium and high power hydraulic systems. The valve has 4 ways (ports) and 3 internal spool positions. Applications: Heavy...
COMPACT CYLINDER ISO-21287

€34.06 (tax excl.)
€41.21 (tax included)
An ISO-21287 compact cylinder is designed with a high-strength aluminum tube and cylinder heads, ensuring a lightweight yet robust structure. Its main advantage is its compact design , which allows for high thrust and...
0302L ANGLED SCREWDRIVER

€219.73 (tax excl.)
€265.87 (tax included)
An 0302L offset screwdriver is used to tighten and loosen screws in hard-to-reach places where other screwdrivers won't fit. The applications of an offset screwdriver are varied, such as mechanics, carpentry,...

Menu

Please sign in first.

Sign in