Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
FIG. 241 MALE-FEMALE REDUCER 316 STAINLESS STEEL NPT THREAD

FIG. 241 MALE-FEMALE REDUCER 316 STAINLESS STEEL NPT THREAD

A Fig. 241 316 stainless steel male-female NPT reducer is a threaded fitting used to join two pipes or tubes of the same material but different diameters, creating a reduction in flow rate. It consists of a conical piece with a male thread at one end and a female thread at the other end, with an internal diameter decreasing along the piece.

Typical applications include the food and pharmaceutical industries, chemical industries, oil and gas industries, water treatment, irrigation and sprinkler systems.

Technical sheet:

  • Stainless steel fitting NPT thread 20 bar
  • Stainless Steel Microfusion A-316
  • Dimensions according to ISO-4144 standard
  • Manufactured according to UNE EN 10213-4
  • ANSI B 2.1 NPT thread
  • Temperature -20 / 220ºC
€1.83 (tax included)
€1.51 (tax excl.)
SELECT THE THREAD
  • 1/4"-1/8"
  • 3/8"-1/4"
  • 3/4"-1/2"
  • 3/4"-3/8"
  • 1/2"-1/4"
  • 1/2"-3/8"
  • 1"-1/2"
  • 1"-3/4"
  • 1-1/4"-3/4"
  • 1-1/4"-1"
  • 1-1/2"-1"
  • 1-1/2" - 1-1/4"
  • twenty-one"
  • 2" - 1-1/4"
  • 2" - 1-1/2"
  • 2-1/2" - 2"
  • 3" - 2-1/2"
Reference:
123601
Description

Fig. 241 Male-female reduction 316 stainless steel NPT thread

Product Details
123601
Comments
10 other products in the same category:
FIG. 290 STAINLESS STEEL MALE PLUG 316 NPT THREAD

€1.30 (tax excl.)
€1.57 (tax included)
Fig. 290 Stainless steel 316 male plug NPT thread is a threaded fitting used to seal the end of a pipe or tube, preventing the passage of liquids or gases. Its typical applications are in the food and pharmaceutical...
FIG. 399 316 STAINLESS STEEL HOSE spigot NPT THREAD

€2.86 (tax excl.)
€3.46 (tax included)
Fig. 399 A 316 stainless steel hose nipple with NPT thread is a threaded fitting used to connect a flexible hose to a rigid pipe or tube, allowing the flow of liquids or gases. It consists of a cylindrical piece with...
FIG. 130 T FEMALE STAINLESS STEEL 316 NPT THREAD

€3.22 (tax excl.)
€3.90 (tax included)
Fig. 130 T female stainless steel 316 NPT thread is a "T" shaped threaded fitting used to join three pipes or tubes of the same diameter at a 90º angle. Its typical applications are the pharmaceutical and food...
FIG. 92 316 STAINLESS STEEL MALE-FEMALE ELBOW NPT THREAD

€2.77 (tax excl.)
€3.35 (tax included)
Fig. 92 male-female elbow 316 stainless steel NPT thread is a pipe fitting used to join two sections of pipe at a 90º angle. It has a male threaded connection at one end and a female threaded connection at the other....
FIG. 280 STAINLESS STEEL MACHON 316 NPT THREAD

€1.67 (tax excl.)
€2.02 (tax included)
The Fig. 280 Machon inox 316 NPT thread is useful for connecting a pipe or tube to another female threaded component, such as a valve, elbow, or tee. It is usually installed in the food and pharmaceutical industry,...
FIG. 180 STAINLESS STEEL CROSS 316 NPT THREAD

€5.29 (tax excl.)
€6.40 (tax included)
The Fig. 180 316 Stainless Steel Cross NPT Thread is a threaded fitting used to join four pipes or tubes of the same diameter at a 90-degree angle, allowing the flow of liquids or gases in different directions. It is...
FIG. 120 45º FEMALE ELBOW INOX 316 NPT THREAD

€2.93 (tax excl.)
€3.55 (tax included)
Fig. 120 female elbow 45º stainless steel 316 NPT thread is a threaded fitting used to change the flow direction at a 45º angle in pipes. It is commonly used in sectors such as the chemical, food and pharmaceutical...
FIG. 90 316 STAINLESS STEEL FEMALE ELBOW NPT THREAD

€2.09 (tax excl.)
€2.53 (tax included)
The Fig. 90 NPT female 316 stainless steel elbow is a threaded fitting used to change the flow direction by 90 degrees in pipes. It is made of 316 stainless steel, a high-quality, corrosion-resistant material. The...
FIG. 240 316 STAINLESS STEEL REDUCER SLEEVE NPT THREAD

€2.28 (tax excl.)
€2.76 (tax included)
The Fig. 240 NPT 316 stainless steel reducing sleeve is a threaded fitting used to securely and tightly join two pipes or tubes of the same material but different diameters, allowing the flow of liquids or gases. It...
FIG. 270 SMOOTH STAINLESS STEEL SLEEVE 316 NPT THREAD

€1.54 (tax excl.)
€1.86 (tax included)
Fig. 270 316 stainless steel smooth sleeve with NPT thread is a threaded fitting used to join two pipes or tubes of the same material and diameter securely and tightly, allowing the flow of liquids or gases. It is a...
Recently Viewed
FIG. 241 MALE-FEMALE REDUCER 316 STAINLESS STEEL NPT THREAD

€1.83 (tax included)
€1.51 (tax excl.)
A Fig. 241 316 stainless steel male-female NPT reducer is a threaded fitting used to join two pipes or tubes of the same material but different diameters, creating a reduction in flow rate. It consists of a conical...
PETROLEUM GUN

€36.30 (tax excl.)
€43.92 (tax included)
An air-powered oiling gun is a pneumatic tool designed to apply a thin layer of protective oil to metal surfaces. It uses compressed air pressure to atomize the oil and spray it as a fine mist. Applications:...
20X20 LIGHTWEIGHT STRUCTURAL ALUMINUM PROFILE

€12.09 (tax excl.)
€14.63 (tax included)
The 20x20 lightweight structural aluminum profile is an extruded aluminum piece with a square cross-section of 20 mm by 20 mm, designed to be lightweight while maintaining good strength. Technical sheet: 6 mm slot....
DOUBLE ACTING PISTON GASKET 5 PIECES

€9.60 (tax excl.)
€11.62 (tax included)
Double acting piston seal 5 pieces This seal is used as a double-acting seal. The guide rings incorporated in the seal prevent the possibility of contact between the piston and the cylinder liner. Technical data...
2-WAY VALVE SAE-6000 PSI FLANGE

€417.45 (tax excl.)
€505.11 (tax included)
A 2-way SAE-6000 PSI flange valve is a type of heavy-duty valve designed for fluid control in very high pressure hydraulic systems. Applications: heavy mobile machinery, lifting equipment, oil platforms, laboratories,...
ALUMINUM MANIFOLD 3 OUTLETS 1/2"

€40.10 (tax excl.)
€48.52 (tax included)
A 3-way 1/2" aluminum manifold is an essential component in compressed air systems, designed to distribute a main air supply to multiple branches. It is suitable for medium flow rates and applications where corrosion...

Menu

Please sign in first.

Sign in