Click for more products.
No products were found.

1/8" SAFETY VALVE SET

A 1/8" calibrated safety valve automatically releases pressure from a system when it exceeds a preset value (the calibration). Its function is to prevent damage to the system due to overpressure.

Applications: Pneumatic systems, Laboratory equipment and Industrial automation.

Technical sheet:

  • Calibrated and sealed with a safety seal according to European regulation PED 9723/23/CE, which regulates pressure components.
  • Supplied with corresponding CE certificate.
  • Manual safety ring.
  • Preset settings 8 - 10 - 12 - 15 bar.
  • Available threads 1/8 - 1/4 - 3/8 - 1/2 - 3/4 - 1"
  • Nominal evacuation diameters 6 - 10 - 15 mm.
Read moreShow less
€10.13 (tax incl.)
€8.37 (tax excl.)
PRESSURE
  • 8 Bar
  • 10 Bar
  • 12 Bar
  • 15 Bar
Reference:
43080007
Description

1/8" safety valve calibrated

Read moreShow less
Product Details
43080007
Comments (0)
8 other products in the same category:
€8.75 (tax excl.)
€10.59 (tax incl.)
A 1/4" calibrated safety valve is used to automatically release the pressure of a system when it exceeds a preset value. The most common uses are in pneumatic systems, hydraulic systems, boilers and industrial...
€49.50 (tax excl.)
€59.90 (tax incl.)
A 3/4" calibrated safety valve is used to automatically release the pressure of a system when it exceeds a preset value (the calibration). Its function is to prevent the system from being damaged by overpressure....
€17.60 (tax excl.)
€21.30 (tax incl.)
A 1/2" calibrated safety valve is used to automatically release the pressure of a system when it exceeds a preset value (the calibration). Its function is to prevent the system from being damaged by overpressure....
€59.40 (tax excl.)
€71.87 (tax incl.)
A 1" calibrated safety valve automatically releases the pressure of a system when it exceeds a preset value (the calibration). Its main function is to prevent the system from being damaged by overpressure....
€23.10 (tax excl.)
€27.95 (tax incl.)
The direct-action, flat-seat, spring- loaded safety valve is a device that relieves pressure in a system when it reaches a preset level. When the system pressure exceeds the valve's set pressure, the ball lifts off...
€5.50 (tax excl.)
€6.66 (tax incl.)
A 1/8" adjustable 13-18 bar safety valve without set point automatically releases the pressure of a system when it exceeds a preset and adjustable value between 13 and 18 bar. Applications: Pneumatic systems,...
€6.30 (tax excl.)
€7.62 (tax incl.)
A 6-bar safety valve for water automatically releases excessive pressure in a water-handling system, preventing damage to equipment, pipes, or vessels. Its function is a pressure relief mechanism that activates when...
€5.50 (tax excl.)
€6.66 (tax incl.)
A 1/8" adjustable 6-15 bar safety valve without a set point automatically releases system pressure when it exceeds a preset, adjustable value between 6 and 15 bar. The absence of a set point means it has no fixed set...
Recently Viewed
€10.13 (tax incl.)
€8.37 (tax excl.)
A 1/8" calibrated safety valve automatically releases pressure from a system when it exceeds a preset value (the calibration). Its function is to prevent damage to the system due to overpressure. Applications:...
€22.69 (tax excl.)
€27.45 (tax incl.)
Polyurethane spiral tube turns out to be the ideal material for the production of spiral tubes, due to its rubber-like flexibility, weighs 1/3 less and lasts 5 times longer. It has low resistance to extension force,...
€14.20 (tax excl.)
€17.18 (tax incl.)
A SCH-40 A-316L stub end is a short, unthreaded pipe end designed to be welded to a pipe. It is used in the manufacture of industrial piping systems, especially when using lap joint flanges. Applications: Chemical and...
€3.40 (tax excl.)
€4.11 (tax incl.)
Identification ring It is used to be placed on an electrical socket or connector and to identify it visually. Its function is to organize and label sockets in complex electrical systems, such as control panels,...

Menu

Settings