PURGER FILTER WITH TAP

A drain filter with tap combines the filtration and drain functions in a single device.

Applications: manufacturing industry, automotive industry, food and pharmaceutical industry and pneumatic systems in general.

Technical sheet:

Filter with integrated tap for timed drains
Integrated maintenance valve
Double entry
1/2-1/4 BSP thread

€12.27 (tax included)

€10.14 (tax excl.)

Reference:

6009

Description
Comments

Description

purge filter with tap

Product Details

Reference 6009

Comments

12 other products in the same category:

SAFETY VALVE WITHOUT TARE 1/8" ADJUSTABLE 0.5-5 BAR

€5.50 (tax excl.)

€6.66 (tax included)

Safety valve without tare 1/8" adjustable 0.5-5 bar Automatically releases excess pressure in a system when the valve exceeds a preset value. Once the pressure drops below the set value, the valve closes...

YORK BRASS NON-RETURN VALVE

€5.00 (tax excl.)

€6.05 (tax included)

York brass non-return valve A York brass non-return valve is a flow control device designed to allow fluid to pass in only one direction and automatically prevent backflow, made of brass and with a York type...

1/8" VALVE PNEUMATIC OR MANUAL RETURN HANDLE KNOB

€30.00 (tax excl.)

€36.30 (tax included)

A 1/8" knob pull return pneumatic or manual valve is a small pneumatic component to control the flow of compressed air manually. The return to the initial position can be by a spring (manual) or by a pneumatic signal....

LIMIT SWITCH SENSOR

€22.23 (tax excl.)

€26.90 (tax included)

A limit switch is a device used to detect the limit or end position of a moving element. Applications: mechanical, pneumatic or automated systems. Main features: It detects a pressure drop by emitting a command signal...

STAINLESS STEEL BALL VALVE WITH DIN ISO-5211 FLANGE

€89.00 (tax excl.)

€107.69 (tax included)

The DIN ISO-5211 flanged stainless steel ball valve is used to control fluid flow by means of a perforated sphere that rotates to open or close the passage of the fluid. Applications: Chemical and petrochemical...

BALL VALVE FOR PIPE

€5.76 (tax excl.)

€6.97 (tax included)

A pipe ball valve is specifically designed to be installed directly into a piping system (rigid pipes) using a compression fitting. Its function is to completely open or close the flow of water by rotating a...

3-WAY BALL VALVE BRASS T-SLOT PLATE ISO-5211

€23.76 (tax excl.)

€28.75 (tax included)

The ISO-5211 brass 3-way T-shaped ball valve is ideal for mixing fluids or diverting flow to two outlets simultaneously. It includes a mounting plate that complies with ISO 5211. Common Applications: Plumbing and...

SECTIONING FITTING 3/2 Ø6

€16.36 (tax excl.)

€19.80 (tax included)

A 3/2" Ø6" shut-off fitting is a manual shut-off and relief valve integrated into a fitting body, designed to quickly isolate pressure from a section of the pneumatic circuit and bleed any remaining air. It has 3 ways...

WAFER BUTTERFLY VALVE STAINLESS STEEL DISC

€55.00 (tax excl.)

€66.55 (tax included)

The stainless steel wafer butterfly valve with a disc is available with an optional flange for mounting on an ISO-5011 actuator. It is designed to control the flow of fluids (liquids or gases) through a pipeline. The...

FILTER AND

€4.38 (tax excl.)

€5.30 (tax included)

Filter Y It is a plumbing accessory designed to filter impurities present in a fluid, such as water. Its Y shape allows fluid to enter through two branches and exit through a third. Applications: Domestic...

BRASS FEMALE BALL VALVE PN-25

€3.61 (tax excl.)

€4.37 (tax included)

The PN-25 female brass ball valve provides quick and tight closure. It features a brass body, a female thread for connection to a pipe, and a spherical ball inside that acts as a shutter. Applications: hydraulic,...

WAFER TYPE UNIDIRECTIONAL PNEUMATIC KNIFE GATE VALVE

€238.42 (tax excl.)

€288.49 (tax included)

The wafer-type pneumatic one-way knife gate valve, also known as a gate or sluice gate, is suitable for liquids containing a maximum of 5% suspended solids. If used for gravity discharge of dry solids, it is...