Click for more products.
No products were found.

FIXED DIN FLANGE FOR HOSE

A fixed DIN hose flange is a component used in fluid systems that allows a hose to be attached to a port or component on a pipe or machine. Unlike a swivel flange, this flange is firmly attached to the fitting body and cannot rotate freely once the hose has been fitted.

Applications: Heavy machinery, Hydraulic power units, Metallurgical industry, Construction machinery.

  • Constructed of steel.
  • PN-10/16
  • It incorporates housing for DIN-2817 safety flanges
Read moreShow less
€51.31 (tax incl.)
€42.41 (tax excl.)
DN
  • DN-19
  • DN-25
  • DN-32
  • DN-40
  • DN-50
  • DN-65
  • DN-80
  • DN-102
Reference:
203101
Description

fixed DIN hose flange

Read moreShow less
Product Details
203101
Comments (0)
8 other products in the same category:
€5.03 (tax excl.)
€6.09 (tax incl.)
A double barb fitting is a connector with two identical barbed ends used to securely join two hoses. To ensure a tight and pressure-resistant connection, it must always be supplemented with hose clamps. Applications:...
€41.01 (tax excl.)
€49.62 (tax incl.)
A swivel DIN hose clamp is designed with a hose support and a flange connection. Its key feature is that one of its elements can rotate freely around the hose after it has been fitted, facilitating alignment and...
€2.81 (tax excl.)
€3.40 (tax incl.)
A soldering pin It is used to permanently join a flexible hose to a piping system or other rigid component using a welding process. The barbed end is inserted into the flexible hose with a firm grip, while the solder...
€7.79 (tax excl.)
€9.43 (tax incl.)
Fittings conforming to EN 14420-5 are suitable for the 4-bolt DIN-2817 safety clamp conforming to EN 14420-3. Fittings for mounting on this clamp are either smooth or serrated with a safety collar that fits the flange...
€6.05 (tax excl.)
€7.32 (tax incl.)
A DIN 2817 stainless steel swivel female fitting with a special barb for two-part or four-bolt clamps (type RS) is a fitting that complies with the EN14420-5 (DIN 2817) standard, the same standard as the clamps. It is...
€7.72 (tax excl.)
€9.34 (tax incl.)
A hose barb is used to connect a flexible hose to a threaded component, such as a pipe, valve, pump, or other equipment. Common applications: Irrigation and gardening systems, Compressed air systems, Water supply...
€0.88 (tax excl.)
€1.07 (tax incl.)
A klingerit gasket is a flat sealing gasket used to create a watertight seal between two contact surfaces (usually flanges), preventing fluid leakage in industrial systems. Applications: Industry, Heating and cooling...
€4.70 (tax excl.)
€5.69 (tax incl.)
DIN 2817 stainless steel male fitting with special spigot for two-part or four-bolt clamps (type RS). These fittings comply with EN14420-5 (DIN 2817), the same standard as the clamps. They are used to connect hoses to...
Recently Viewed
€51.31 (tax incl.)
€42.41 (tax excl.)
A fixed DIN hose flange is a component used in fluid systems that allows a hose to be attached to a port or component on a pipe or machine. Unlike a swivel flange, this flange is firmly attached to the fitting body...
€60.00 (tax excl.)
€72.60 (tax incl.)
The 9913055 rotary transfer pump is used to transfer a liquid from one container or place to another. The pump creates a pressure difference that attracts the liquid, and as the pressure changes, the liquid is...
€140.00 (tax excl.)
€169.40 (tax incl.)
The STABILUS BLOC O LIFT 730262 300N spring is a compression spring with a valve. It is equipped with a special piston valve system that separates the two pressurized zones of the spring, allowing for continuous...

Menu

Settings