Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
90º HOSE ADAPTER

90º HOSE ADAPTER

The 90º hose adapter is used in hydraulic, pneumatic and general fluid systems. It is used to connect two hoses or a hose and a rigid pipe at a 90º angle.

Typical applications are found in pneumatic systems, hydraulic systems, food industry and refrigeration.

Technical data sheet:

  • Nickel-plated brass body.
  • Profile Standard 97/23 CE 3.3
  • Possibility of identifying sockets by means of coloured rings
  • Nominal pitch 8 mm.
  • Stainless steel spring and balls.
  • NBR-VITON gaskets
  • Serving temperature -15 / 125ºC.
  • Working pressure 10 bar.
  • Flow rate 30 l/min.
€12.32 (tax included)
€10.18 (tax excl.)
DIAMETERS
  • Ø8
  • Ø 10
  • Ø 12
Reference:
19360005
Description

90º hose adapter

Product Details
19360005
Comments
Related products
MALE PLUG CONICAL THREAD MALE PLUG CONICAL THREAD

€3.03 (tax excl.)
€3.67 (tax included)
Male plug conical thread Its function is to safely and hermetically join two components, usually tubes or fittings. The tapered thread ensures a tight seal when tightened, as the threading progresses, the pressure...
EXTENDED MALE PLUG EXTENDED MALE PLUG

€7.60 (tax excl.)
€9.20 (tax included)
Extended male plug It is used to join two components, usually tubes or fittings. It stands out for its greater length than a standard male plug. Applications: Pneumatics, Hydraulics, Food industry, Industrial...
IDENTIFICATION RING IDENTIFICATION RING

€3.40 (tax excl.)
€4.11 (tax included)
Identification ring It is used to be placed on an electrical socket or connector and to identify it visually. Its function is to organize and label sockets in complex electrical systems, such as control panels,...
SAPA CLAMP 2 EARS (100 Units) SAPA CLAMP 2 EARS (100 Units)

€21.70 (tax excl.)
€26.26 (tax included)
A two-ear hose clamp is primarily used to securely join hoses, flexible tubing, and similar items. In most cases, no special tools are required for installation. Applications: Automotive industry, Agriculture, Food...
12 other products in the same category:
MINIATURE FEMALE STRAIGHT TUBE UNION

€1.97 (tax excl.)
€2.38 (tax included)
Miniature fitting female thread tube union Acetal resin body. Metal parts in nickel-plated brass. Ideal for micropneumatic assemblies. 40% reduction compared to a conventional fitting. Elliptical push button: Easy...
25º SIDE BANJO BALL FOR BRAKE PIPE

€4.24 (tax excl.)
€5.13 (tax included)
A 25° lateral banjo brake line fitting is a specific type of fitting used in brake systems, designed to connect a brake hose or tube to a component in an articulated manner and with a particular direction....
EXTENDED MALE PLUG

€7.60 (tax excl.)
€9.20 (tax included)
Extended male plug It is used to join two components, usually tubes or fittings. It stands out for its greater length than a standard male plug. Applications: Pneumatics, Hydraulics, Food industry, Industrial...
STRAIGHT BALL BANJO FOR BRAKE PIPE

€3.58 (tax excl.)
€4.33 (tax included)
A straight banjo fitting is a fitting used in hydraulic brake systems. Its function is to securely and flexibly connect the sections of tubing that make up the brake fluid circuit. Applications: Vehicle braking...
90º SWIVEL NUT 1/8" FOR BRAKE PIPE

€7.26 (tax excl.)
€8.78 (tax included)
A 1/8" 90º brake line swivel nut is an essential component in hydraulic braking systems, especially on motorcycles and some industrial vehicles. It allows the brake line to be connected to the brake caliper or other...
MINIATURE TUBE REDUCTION

€1.77 (tax excl.)
€2.14 (tax included)
Miniature tube reduction instant fitting Acetal resin body. Metal parts in nickel-plated brass. Ideal for micropneumatic assemblies. 40% reduction compared to a conventional fitting. Elliptical push button: Easy...
BANJO 90º BALL FOR BRAKE PIPE

€4.24 (tax excl.)
€5.13 (tax included)
A 90° banjo fitting for brake lines is a specific type of hydraulic fitting used in vehicle brake systems. Its function is to securely and leak-free connect a brake line or pipe to a brake system component at a 90°...
MINIATURE TUBE TEA

€2.62 (tax excl.)
€3.17 (tax included)
A miniature T-tube is used to join three very small tubes. Common applications: Instrumentation, Laboratories, Medical Devices, Electronics, Microfluidics or Precision Pneumatics. Technical sheet: Acetyl resin body....
MINIATURE ELBOW INSTANT PIPE UNION

€2.06 (tax excl.)
€2.49 (tax included)
Miniature elbow union tube fitting Acetal resin body. Metal parts in nickel-plated brass. Ideal for micropneumatic assemblies. 40% reduction compared to a conventional fitting. Elliptical push button: Easy disassembly...
T-FITTING FOR BRAKE PIPE

€19.25 (tax excl.)
€23.29 (tax included)
A brake line tee fitting is a fitting used in vehicle braking systems (cars, motorcycles, etc.) to divide or join the flow of brake fluid through three lines. Applications: Automotive braking systems, Motorcycle...
BANJO SPHERICAL 25º FOR BRAKE PIPE

€4.13 (tax excl.)
€5.00 (tax included)
A 25° banjo fitting for brake line is an essential component in hydraulic brake systems, especially in automotive applications. It features a banjo-type connection (with a nut that tightens onto a flat surface) and a...
UNION ELBOW LONG TUBE MINIATURE

€2.81 (tax excl.)
€3.40 (tax included)
A miniature long tube elbow is a small connector for low-pressure fluid or pneumatic systems that allows two tubes of the same diameter to be joined with a 90° change in direction. It features an extended length at...
Recently Viewed
90º HOSE ADAPTER

€12.32 (tax included)
€10.18 (tax excl.)
The 90º hose adapter is used in hydraulic, pneumatic and general fluid systems. It is used to connect two hoses or a hose and a rigid pipe at a 90º angle. Typical applications are found in pneumatic systems,...
PROFILE GROOVE COVER

€5.70 (tax excl.)
€6.90 (tax included)
A profile groove cover is a thin, flexible piece that is inserted into the groove of an aluminum profile. Its main function is to conceal the groove, providing a cleaner and more uniform aesthetic finish. Typical...
PG AIR CANNON

€421.05 (tax excl.)
€509.47 (tax included)
The PG air cannon is designed to generate powerful jets of compressed air. These air jets are used for various tasks such as surface cleaning, product drying, dust removal and fluidization of bulk materials. Other...

Menu

Please sign in first.

Sign in