Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
1/4" FEMALE INFLATION NOZZLE
1/4" FEMALE INFLATION NOZZLE
1/4" FEMALE INFLATION NOZZLE
1/4" FEMALE INFLATION NOZZLE
1/4" FEMALE INFLATION NOZZLE
1/4" FEMALE INFLATION NOZZLE

1/4" FEMALE INFLATION NOZZLE

A 1/4" female inflation nipple is commonly used on inflation systems, such as air compressors. Its function is to connect a hose or inflation tool to a compressed air source.
Applications: mechanical workshops, industry and home.
Technical sheet:
  • Tire inflation nozzle.
  • Brass body
  • Compressed air outlet hole.
  • 1/4" female thread output
€7.99 (tax included)
€6.60 (tax excl.)
Reference:
4329
Description

1/4" female inflation nozzle

Product Details
4329
Comments
6 other products in the same category:
SINGLE-PHASE PRESSURE SWITCH 220V

€20.00 (tax excl.)
€24.20 (tax included)
A 220V single-phase pressure switch is an electromechanical device designed to detect and respond to changes in fluid pressure (usually air or water). It allows an electrical circuit to be activated or deactivated...
INFLATION CHECKER 1200

€31.90 (tax excl.)
€38.60 (tax included)
A 1200 inflation gauge is a device that measures and controls the inflation pressure of tires or other inflatable objects, with a maximum reading or setting capacity of up to 1200 pressure units. Technical sheet:...
THREE-PHASE PRESSURE SWITCH 380V

€24.00 (tax excl.)
€29.04 (tax included)
A 380V three-phase pressure switch is used to monitor and control pressure in systems with a three-phase power supply at a nominal voltage of 380V. Its function is to open or close one or more electrical contacts when...
INFLATION NOZZLE Ø6

€3.30 (tax excl.)
€3.99 (tax included)
A 6mm tire inflation nozzle is a component with a 6mm diameter outlet hole designed to connect a compressed air source (such as a compressor or air pump) to a tire valve stem. It is compatible with standard valve...
PETROLEUM GUN

€36.30 (tax excl.)
€43.92 (tax included)
An air-powered oiling gun is a pneumatic tool designed to apply a thin layer of protective oil to metal surfaces. It uses compressed air pressure to atomize the oil and spray it as a fine mist. Applications:...
LEAK DETECTION SPRAY

€31.90 (tax excl.)
€38.60 (tax included)
Leak detection spray is a liquid for detecting leaks in gas and compressed air systems. It locates leaks in tanks, pipes, hoses, bolted joints, welded seams, flanged joints, and fittings. It is a water-soluble and...
Recently Viewed
1/4" FEMALE INFLATION NOZZLE

€7.99 (tax included)
€6.60 (tax excl.)
A 1/4" female inflation nipple is commonly used on inflation systems, such as air compressors. Its function is to connect a hose or inflation tool to a compressed air source. Applications: mechanical workshops,...
PRESSURE CYLINDER STOP

€4.28 (tax excl.)
€5.18 (tax included)
The cylinder stop is used to stop or limit the linear movement of a hydraulic or pneumatic cylinder. Its function is to ensure that the cylinder does not extend beyond a predefined limit, thus controlling the final...
NG-10 MODULAR LIMITING VALVE

€168.75 (tax excl.)
€204.19 (tax included)
A NG-10 modular relief valve is a hydraulic component designed to protect a circuit or section of a hydraulic system from excessive pressure by diverting unnecessary oil flow when the pressure exceeds a preset maximum...
DIN-43650-A RECTIFIER CONNECTOR

€12.00 (tax excl.)
€14.52 (tax included)
DIN-43650-A rectifier connector A DIN-43650-A rectifier connector is an electrical device used for connecting solenoid valve coils and other industrial actuators, which integrates a rectifier to convert alternating...
VM FLUIDIFIER (mini)

€63.00 (tax excl.)
€76.23 (tax included)
The VM (mini) Fluidizer combines material venting at pressures up to 6 bar with gentle vibration of the tank or silo wall (see technical data sheet for size, placement, and quantity). Due to the manufacturing...
FLAT LUBRICATION BRUSH WITH SIDE THREAD

€22.40 (tax excl.)
€27.10 (tax included)
The flat side-threaded grease brush is used in automatic lubrication systems to apply oil in a controlled manner to specific surfaces, such as chains, guides, or gears. It features a flat head with bristles that...

Menu

Please sign in first.

Sign in